Category: Engine - Intake/Fuel
Price: $95
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): '92+ Civic/EL & Del Sol
Item Condition: OR
Shipping Information: Item can be shipped
Engine: Part suitable for gas truck

A good core ECZ-G head for 292-312 Y-block. Price does not include shipping. A second ECZ-G head is available if needed. These need to be rebuilt. I can check out the springs and see if they are up to stock seat pressures, but if the buyer is installing a new cam the original springs cant be used, so let me know.

For owners of 272's, 1955 or 56, I have a very good set of PowerPak heads that came on '55 272, along with the 4bbl intake that came on the '55 PowerPak option.

Other engine components available.

This(these) ECZ G's are applicable to 1955-1964 272 292 312 engines. They are the best stock head available for the Y engines, due to intake port design, intake valve size, and combustion chamber volume.


Pictures on request.

 

hello, could see an image of the heads?

 

This probably wont work:
No it didnt work.
If you would like a picture PM me your email address and I will send it. Mike

 

Mike, you need to correct your listing 1948-1960, should be 1954-1960

 

Thanks Hiball, if I remember they only gave me the poor option of 48-60. I'll try.

 

Yes, the options available as to years were 48-60, 61-66, ... I had checked both but only one showed. So will try the 61-66 route. Also did a little edit to the original post.

 

Sorry I didn't know about the options, I just thought you made a typo error

 

http://i1225.photobucket.com/albums/...ps8f0e5ad6.jpg

Perhaps this will work.

 

I sent him a private message, what to see?