4.9i6 Feed Back to Duraspark Convertion heIp
#1
4.9i6 Feed Back to Duraspark Convertion heIp
I just got my first truck and having problems with it.
Someone in there wisdom dissided to take the feed back system off.
AII they Left on it was the carb and distibuter.
I wana change to Duraspark system on the pre 83s
Just a couple of questions.
I went to the junk yard and found a few of the parts i need. but couIdnt find a carb. can anyone teII me if there on any other car/truck that would suit?
Or what type carb i need? so could possibly Ebay a new one
are these what i need.
Ignition moduI
https://lh5.googleusercontent.com/-u...728_105445.jpg
Coil and Ditibuter
and the wire harnes shown in both pics
https://lh3.googleusercontent.com/-1...728_105500.jpg
This is whats in my truck atm.
https://lh6.googleusercontent.com/-q...728_013806.jpg
https://lh5.googleusercontent.com/--...728_013753.jpg
Someone in there wisdom dissided to take the feed back system off.
AII they Left on it was the carb and distibuter.
I wana change to Duraspark system on the pre 83s
Just a couple of questions.
I went to the junk yard and found a few of the parts i need. but couIdnt find a carb. can anyone teII me if there on any other car/truck that would suit?
Or what type carb i need? so could possibly Ebay a new one
are these what i need.
Ignition moduI
https://lh5.googleusercontent.com/-u...728_105445.jpg
Coil and Ditibuter
and the wire harnes shown in both pics
https://lh3.googleusercontent.com/-1...728_105500.jpg
This is whats in my truck atm.
https://lh6.googleusercontent.com/-q...728_013806.jpg
https://lh5.googleusercontent.com/--...728_013753.jpg
#2
Thread
Thread Starter
Forum
Replies
Last Post
Muidem
Ford Inline Six, 200, 250, 4.9L / 300
30
06-17-2011 07:53 PM
diesellou86
Ford Inline Six, 200, 250, 4.9L / 300
8
11-16-2010 12:16 PM
83bronco4.9l
Ford Inline Six, 200, 250, 4.9L / 300
5
01-05-2009 07:04 PM
1200bandit
Ford Inline Six, 200, 250, 4.9L / 300
4
10-19-2003 11:32 PM