Go Back   Ford Truck Enthusiasts Forums > Diesel > 1994.5 - 1997 7.3L Power Stroke Diesel
Sign in using an external account
Register Forgot Password?


1994.5 - 1997 7.3L Power Stroke Diesel SPONSORED BY:

Reply
 
 
 
 
LinkBack Thread Tools Search this Thread
  #1  
Old 06-24-2013, 03:43 PM
Ford4Life7.3's Avatar
Ford4Life7.3 Ford4Life7.3 is offline
Posting Guru
 
Join Date: May 2011
Posts: 2,271
Ford4Life7.3 has a good reputation on FTE.Ford4Life7.3 has a good reputation on FTE.Ford4Life7.3 has a good reputation on FTE.
Where in the heck can I find...

Where can I get the trim that goes across the dash that says XLT, and the matching trim for all 4 doors? As well as the little piece on the drivers side dash? Ive looked everywhere cant find it. Also tried ordering the "dash kit" from Mimousa....what a crock of ******. Even if i had all the trim, their 3m stick on stuff is bull hockey. Doesnt fit and barely covers the trim it does fit on.
__________________
Rob-1995 F350 XLT, CC/LB, 4x4, 4:10's, ZF-5, 3in downpipe, 5" stacks, EBPV gutted, Stancor GPR, FPR shimmed, 6637 Intake, PHP Tunes on TS-6 chip,
2in Skyjacker lift (rear add-a-leaf), 2in body lift
A technician breaks it down until he knows exactly whats wrong and fixes it. A mechanic just replaces **** till it works.
Reply With Quote
  #2  
Old 06-24-2013, 04:16 PM
ReBilld's Avatar
ReBilld ReBilld is offline
Post Fiend
 
Join Date: Jan 2012
Location: Southern West Virginia
Posts: 8,869
ReBilld has a great reputation on FTE.ReBilld has a great reputation on FTE.ReBilld has a great reputation on FTE.ReBilld has a great reputation on FTE.ReBilld has a great reputation on FTE.
Are you missing some of the trim Rob? You can paint it all to match.
__________________
Bill

'95 F350 CCLB 4x4 dually,ZF 5spd,4.10,Rosewood Stage 2s,T500,S366,IC,Tony Wildman tunes,e-fuel,6637,CCV mod,3.5" DP,Diamond Eye 5" exhaust,Valair clutch,IH water pump,Scangauge,GlowShift gauges
'92 F350 CCLB 4x4,ZF 5spd,4.10,460 gas to PSD conversion project truck
Reply With Quote
  #3  
Old 06-24-2013, 04:41 PM
Ford4Life7.3's Avatar
Ford4Life7.3 Ford4Life7.3 is offline
Posting Guru
 
Join Date: May 2011
Posts: 2,271
Ford4Life7.3 has a good reputation on FTE.Ford4Life7.3 has a good reputation on FTE.Ford4Life7.3 has a good reputation on FTE.
Quote:
Originally Posted by ReBilld View Post
Are you missing some of the trim Rob? You can paint it all to match.
All my door trim except for one is broken since i got the truck. The dash ones are fine as well. Just missing the door panel ones. Any leads on them by chance bill? Thanks for the reply!
__________________
Rob-1995 F350 XLT, CC/LB, 4x4, 4:10's, ZF-5, 3in downpipe, 5" stacks, EBPV gutted, Stancor GPR, FPR shimmed, 6637 Intake, PHP Tunes on TS-6 chip,
2in Skyjacker lift (rear add-a-leaf), 2in body lift
A technician breaks it down until he knows exactly whats wrong and fixes it. A mechanic just replaces **** till it works.
Reply With Quote
  #4  
Old 06-24-2013, 07:29 PM
ReBilld's Avatar
ReBilld ReBilld is offline
Post Fiend
 
Join Date: Jan 2012
Location: Southern West Virginia
Posts: 8,869
ReBilld has a great reputation on FTE.ReBilld has a great reputation on FTE.ReBilld has a great reputation on FTE.ReBilld has a great reputation on FTE.ReBilld has a great reputation on FTE.
I'll see what I got.
__________________
Bill

'95 F350 CCLB 4x4 dually,ZF 5spd,4.10,Rosewood Stage 2s,T500,S366,IC,Tony Wildman tunes,e-fuel,6637,CCV mod,3.5" DP,Diamond Eye 5" exhaust,Valair clutch,IH water pump,Scangauge,GlowShift gauges
'92 F350 CCLB 4x4,ZF 5spd,4.10,460 gas to PSD conversion project truck
Reply With Quote
  #5  
Old 06-24-2013, 10:10 PM
fordpride's Avatar
fordpride fordpride is offline
Louisiana Chapter LDR
 
Join Date: Dec 2009
Location: Livoina,La
Posts: 13,035
fordpride has much to be proud offordpride has much to be proud offordpride has much to be proud offordpride has much to be proud offordpride has much to be proud offordpride has much to be proud offordpride has much to be proud offordpride has much to be proud offordpride has much to be proud of
Lmc has them
__________________
Mike
Click here to join the Louisiana chapter
2014 RAM 3500 cummins
96 F350 CC ZF5 53k with grandpas package
Louisiana FTE Member Map
Reply With Quote
  #6  
Old 06-24-2013, 10:20 PM
444dieselrod's Avatar
444dieselrod 444dieselrod is offline
Posting Guru
 
Join Date: Aug 2004
Location: Barnesville MN
Posts: 2,180
444dieselrod is gaining momentum as a positive member of FTE.
The '92-'94 trucks it was chrome. I changed mine over from the boring black to chrome from a set I found in a junk yard.

Diesel Rod
__________________
'96 F250, Reg Cab 7.3 PSD, Auto, 4x4, XLT.
'97 F250, Ext Cab 7.3 PSD, Auto, 4x4, XLT. <-----Parting Out, Full GREY interior still available. Send PM if Interested
'96 F250, Crew Cab 7.3 PSD, 5-SPD, 4x4, XLT.
'99 Jetta TDI, 5-SPD.
Reply With Quote
  #7  
Old 06-25-2013, 08:46 AM
Ford4Life7.3's Avatar
Ford4Life7.3 Ford4Life7.3 is offline
Posting Guru
 
Join Date: May 2011
Posts: 2,271
Ford4Life7.3 has a good reputation on FTE.Ford4Life7.3 has a good reputation on FTE.Ford4Life7.3 has a good reputation on FTE.
Quote:
Originally Posted by fordpride View Post
Lmc has them
I saw the dash piece for the passenger side but thats all i saw. Do they have them for the crew cab doors? Maybe ill give them a call tomorrow.
__________________
Rob-1995 F350 XLT, CC/LB, 4x4, 4:10's, ZF-5, 3in downpipe, 5" stacks, EBPV gutted, Stancor GPR, FPR shimmed, 6637 Intake, PHP Tunes on TS-6 chip,
2in Skyjacker lift (rear add-a-leaf), 2in body lift
A technician breaks it down until he knows exactly whats wrong and fixes it. A mechanic just replaces **** till it works.
Reply With Quote
  #8  
Old 06-25-2013, 12:06 PM
superduty4x4's Avatar
superduty4x4 superduty4x4 is offline
Post Fiend
 
Join Date: Jul 2003
Location: Newport, WA
Posts: 12,022
superduty4x4 has much to be proud ofsuperduty4x4 has much to be proud ofsuperduty4x4 has much to be proud ofsuperduty4x4 has much to be proud ofsuperduty4x4 has much to be proud ofsuperduty4x4 has much to be proud ofsuperduty4x4 has much to be proud ofsuperduty4x4 has much to be proud ofsuperduty4x4 has much to be proud of
I know I have the long piece for the dash and I might have the short pieces on either side of the steering wheel... all in "boring black." I can't help you on the door pieces.

Just a thought, glue them together/reinforce them then have them dipped or wrapped in some vinyl. Carbon fiber looking vinyl would be a nice look.
__________________
Chase
PAA Member #2
97 F350 CCLB 4x4 PSD
96 F350 CCLB 4x4 PSD - totaled 4/17/11 and sorely missed
God speed PaysonPSD, you will be missed
ThumperTalk / All Things Moto! / Back Country Rebels / SAWS / BRC
Reply With Quote
  #9  
Old 06-25-2013, 01:13 PM
madpogue madpogue is online now
Postmaster
 
Join Date: Oct 2003
Location: Madison, WI
Posts: 3,768
madpogue has a very good reputation on FTE.madpogue has a very good reputation on FTE.madpogue has a very good reputation on FTE.madpogue has a very good reputation on FTE.
There must've been multiple options. Both our '95s, they're sort of a brushed silver. Def. not the black I see on some trucks, but def. not chrome, either.

BTW, if anyone has one of the short ones, the one to the right of the steering wheel that goes on the dash bezel, in that brushed silver, could you PM me?
Reply With Quote
  #10  
Old 06-25-2013, 01:26 PM
richdawg's Avatar
richdawg richdawg is offline
Posting Guru
 
Join Date: Oct 2006
Location: Spokane, WA
Posts: 1,342
richdawg has a good reputation on FTE.richdawg has a good reputation on FTE.
Quote:
Originally Posted by superduty4x4 View Post
I know I have the long piece for the dash and I might have the short pieces on either side of the steering wheel... all in "boring black." I can't help you on the door pieces.

Just a thought, glue them together/reinforce them then have them dipped or wrapped in some vinyl. Carbon fiber looking vinyl would be a nice look.
Chase, I thought the carbon fiber wrap sounded interesting, so I googled it and found some video's on the process. It looks like 3M would be good. definitely could give a nice look and have many uses for repair.
__________________
Rich-97 F350 SC Dually long bed 2wd, 5 speed, 410's, 145000 : 6637 intake filter, Tymar 3" down pipe, cat delete, IDM 140v, Digital pyro gauge, Rosewood Stage 1's, FPR shim, CCV mod. Valair 400 HP Organic Clutch, GPR manual momentary switch, Superchip 1700 tuner/programer.
To do would be install 6.0 intercooler (need pipes and boots)
Reply With Quote
  #11  
Old 06-25-2013, 01:42 PM
RÖENTGEEP's Avatar
RÖENTGEEP RÖENTGEEP is offline
FOREIGN GURU
 
Join Date: Jul 2006
Location: Celaya, Gto. MX
Posts: 6,753
RÖENTGEEP is a splendid one to beholdRÖENTGEEP is a splendid one to beholdRÖENTGEEP is a splendid one to beholdRÖENTGEEP is a splendid one to beholdRÖENTGEEP is a splendid one to beholdRÖENTGEEP is a splendid one to behold
Question

Quote:
Originally Posted by Ford4Life7.3 View Post
Where can I get the trim that goes across the dash that says XLT, and the matching trim for all 4 doors? As well as the little piece on the drivers side dash? Ive looked everywhere cant find it. Also tried ordering the "dash kit" from Mimousa....what a crock of ******. Even if i had all the trim, their 3m stick on stuff is bull hockey. Doesnt fit and barely covers the trim it does fit on.
I have the one that says XLT, "boring black" because I change for an Eddie Bauer but how can I send to you from Mexico?.

Quote:
Originally Posted by richdawg View Post
Chase, I thought the carbon fiber wrap sounded interesting, so I googled it and found some video's on the process. It looks like 3M would be good. definitely could give a nice look and have many uses for repair.
Rog, Do you have the video links?


__________________
96 F250, E40D, 2WD, 3.55, 145K. DIY intake-exhaust brake. DP 3-3.5" ceramic coated; HPX; GPR switch; Isspro gauges; shim FPR; Tru-cool; CCV mod; 4" SS exhaust; SS 5" tip; no cat; RacerX VB; TW 6p chip; 203*;140IDM;6.0IC; cristal clear lenses; fuel tank mod; AC cold mod; coolant filter.


«Primum non nosere» Drive safely !
Reply With Quote
  #12  
Old 06-25-2013, 02:31 PM
richdawg's Avatar
richdawg richdawg is offline
Posting Guru
 
Join Date: Oct 2006
Location: Spokane, WA
Posts: 1,342
richdawg has a good reputation on FTE.richdawg has a good reputation on FTE.
Hoze" I didn't save the link but if you just google it you will find lots of information and some video, looked at a couple of video's and thought 3M looked like a simpler process..My first thought was this stuff would be good for a dash repair and many other things. ( I won't call you Hoze" if you don't call me Rog) OK
__________________
Rich-97 F350 SC Dually long bed 2wd, 5 speed, 410's, 145000 : 6637 intake filter, Tymar 3" down pipe, cat delete, IDM 140v, Digital pyro gauge, Rosewood Stage 1's, FPR shim, CCV mod. Valair 400 HP Organic Clutch, GPR manual momentary switch, Superchip 1700 tuner/programer.
To do would be install 6.0 intercooler (need pipes and boots)
Reply With Quote
  #13  
Old 06-25-2013, 03:07 PM
madpogue madpogue is online now
Postmaster
 
Join Date: Oct 2003
Location: Madison, WI
Posts: 3,768
madpogue has a very good reputation on FTE.madpogue has a very good reputation on FTE.madpogue has a very good reputation on FTE.madpogue has a very good reputation on FTE.
Fake carbon fiber ===> "rice, rice, baby...."

(Just my $0.02.....)
Reply With Quote
  #14  
Old 06-25-2013, 06:37 PM
Ford4Life7.3's Avatar
Ford4Life7.3 Ford4Life7.3 is offline
Posting Guru
 
Join Date: May 2011
Posts: 2,271
Ford4Life7.3 has a good reputation on FTE.Ford4Life7.3 has a good reputation on FTE.Ford4Life7.3 has a good reputation on FTE.
Quote:
Originally Posted by RÖENTGEEP View Post
I have the one that says XLT, "boring black" because I change for an Eddie Bauer but how can I send to you from Mexico?.



Rog, Do you have the video links?



I appreciate the offer guys for the XLT one, but that just happens to be the piece I already have haha. The ones I need are the crew cab doors, and to the left of the steering wheel. Ive looked everywhere and nowhere has them. You'd think somewhere would sell them all as a kit, i imagine there'd be somewhat of a market.

As far as the carbon fiber dip goes, id get them dipped, not necessarily on carbon fiber but perhaps a wood grain or different color.
__________________
Rob-1995 F350 XLT, CC/LB, 4x4, 4:10's, ZF-5, 3in downpipe, 5" stacks, EBPV gutted, Stancor GPR, FPR shimmed, 6637 Intake, PHP Tunes on TS-6 chip,
2in Skyjacker lift (rear add-a-leaf), 2in body lift
A technician breaks it down until he knows exactly whats wrong and fixes it. A mechanic just replaces **** till it works.
Reply With Quote
  #15  
Old 06-25-2013, 10:51 PM
ReBilld's Avatar
ReBilld ReBilld is offline
Post Fiend
 
Join Date: Jan 2012
Location: Southern West Virginia
Posts: 8,869
ReBilld has a great reputation on FTE.ReBilld has a great reputation on FTE.ReBilld has a great reputation on FTE.ReBilld has a great reputation on FTE.ReBilld has a great reputation on FTE.
Rob, I haven't gotten a chance yet to go look at the door panels I have. I'll try to do it tomorrow bud.
__________________
Bill

'95 F350 CCLB 4x4 dually,ZF 5spd,4.10,Rosewood Stage 2s,T500,S366,IC,Tony Wildman tunes,e-fuel,6637,CCV mod,3.5" DP,Diamond Eye 5" exhaust,Valair clutch,IH water pump,Scangauge,GlowShift gauges
'92 F350 CCLB 4x4,ZF 5spd,4.10,460 gas to PSD conversion project truck
Reply With Quote
Old 06-25-2013, 10:51 PM
 
 
 
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
66 F100 Dash Trim rwrogers 1961 - 1966 F-100 & Larger F-Series Trucks 10 11-23-2014 11:10 PM
Another aftermarket gauge thread FossenRacing 1973 - 1979 F-100 & Larger F-Series Trucks 10 04-04-2013 07:20 AM
Dash trim clips soooop 1961 - 1966 F-100 & Larger F-Series Trucks 12 02-11-2010 11:55 PM
WTB: '92 Nite Dash Trim '92_Nite Nite, Nascar & Other Limited Edition Ford Trucks 0 01-08-2006 08:54 PM
79 supercab short bed lariat lower trim. move 1973 - 1979 F-100 & Larger F-Series Trucks 2 12-23-2004 09:00 PM


Go Back   Ford Truck Enthusiasts Forums > Diesel > 1994.5 - 1997 7.3L Power Stroke Diesel

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


Participate In The Forums

Create new posts and participate in discussions. It's free!

Sign Up »





All times are GMT -5. The time now is 09:34 AM.


Powered by vBulletin® Version 3.8.7 AC1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Advertising - Terms of Use - Privacy Statement - Jobs
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company.

vbulletin Admin Backup