I'm in the middle of replacing the front rotors. I have the hub off and can see, what I think is the spindle nut. It looks like a round disk with 6 flat spots around the diameter. It appears to be screw on. Is this the spindle nut?
It's a 1993 F350, 4X4, HP Dana 60 and automatic hubs.
It is not either one of the above. I called NAPA. They had the socket for $17.00. It is a 2 3/4" nut, but the nut has 6 flat sides and rounded edges. (hard to explain)
I'll put the socket part number up later for future refference.