I have been running a set of used 305/60/20 toyo open country AT's..... I bought them used with about a 1/4" of tread left, they have been great tires, so I ordered another set and this time I'm wanting to put 2" wheel spaces all the way around....... I only rubbed a little at full turn without spacers.... Drimmel tool help that out..... Just wondering if doing the 2" spacers will make it rub.?


Thanks,

 

Where were you rubbing before? If rubbing on the fender or bumper, spacers will make it rub a lot more because the tire will move forward and back more as you turn.

 

well they only rubbed when i was at full lock..... they they only slightly rubbing. trimmed out barely and never had the problem agian..... well and i also had 1/2 worth of spacers on the front due to the ball joint hitting

 

I'm really not a fan of spacers. With that said, a 2" spacer will create another inch or so of fender/bumper interference. Same effect with going to a more negative offset wheel.