I changed the cam and lifters on my 68 f250 w/390 but had to stop before completing the job.
I have the cam and lifters installed, intake manifold on and the timing chain,gear and cover on.
But now I am a complete loss. I can't find the timing pointer or its mount screw.
I think my pup may have taken some of my parts.
I am afraid to go any further, I have a true memory block, I had a stroke a few years ago that affects my memory at times.
I have a 72 with a 360, but it looks different.

Antone have pictures of what should go on next and how to make sure the front oil seal is right?

I would gladly pay someone in the area for help.
Thanks,
Ray
Crooked River Ranch

 

No ideas? I have manuals, but they just say to do the reverse of removal.

This is very disturbing to me, any pictures of the front end of the motor would help. I just need to see how it goes back together.

Thanks

You can email me; padd54@webformixair.com or call; 541-923-3851

Where can I get a new screw/bolt that holds the pointer on the timing cover, I found the pointer.

 

We have a couple of guys here who are real good on FE blocks, they will be here soon to help.

 

Padd54, most FE engines have a 2 bolts on pointer, I will look to see if I have some of those and give you a call. I will check after work.

 

I pulled one of the bolts out of my 390 in my truck, I can bring it to work tomorrow, if you what to come in to Redmond. I will e-mail you my office number.

 

Did that bolt work out?