You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Category: Exterior - Body Parts Price: $1 Private or Vendor Listing: Private Listing Location (State): CA Item Condition: Used Shipping Information: Item can be shipped Engine: Part suitable for gas truck, Part suitable for diesel truck Part fits:: 1948-1960
I have a lot of 48-52 F1-F8 parts. I have trim, body panels, mechanical, emblems, etc. Did I mention that I have a lot? Please PM or email me with your wants.
I have running boards, tailgates, 48-50 F1 front fenders, 48-52 grilles, many trim pieces/emblems, mechanical parts, etc. I've been parting out trucks for several years and have accumilated a wealth of parts.
__________________
1951 Ford Panel
1952 Ford Panel
1937 Chrysler Airflow C17
...and way too many Bonus Built/Economy Built parts... http://www.bonusbuiltpanels.com/- under construction
Dont know if you want to break anything up but I do need a single hood trim piece...Also what do you have as far as dash ***** go. Thanks for your time, newish to the site but working on getting a 48 f1 back on the road. Thanks again
Running boards and tailgates caught my eye. Currently working on a '51. Have been looking at repo parts on line but like the idea of reusing original if in got shape. Thanks
Dont know if you want to break anything up but I do need a single hood trim piece...Also what do you have as far as dash ***** go. Thanks for your time, newish to the site but working on getting a 48 f1 back on the road. Thanks again
Email sent
Quote:
Originally Posted by Dotnodrog51
Running boards and tailgates caught my eye. Currently working on a '51. Have been looking at repo parts on line but like the idea of reusing original if in got shape. Thanks
PM sent
__________________
1951 Ford Panel
1952 Ford Panel
1937 Chrysler Airflow C17
...and way too many Bonus Built/Economy Built parts... http://www.bonusbuiltpanels.com/- under construction
We are restoring a 52 F3. What do you have for body parts (fenders, bed(it has the 8ft express box))? Tailgate? We currently have a tailgate but i has a grain chute cut into the middle of the ford emblem
We are restoring a 52 F3. What do you have for body parts (fenders, bed(it has the 8ft express box))? Tailgate? We currently have a tailgate but i has a grain chute cut into the middle of the ford emblem
PM sent
Quote:
Originally Posted by WARDNEAL
Have a nice 49 F1 tailgate?
Let me know.
Thanks Neal
Email sent.
__________________
1951 Ford Panel
1952 Ford Panel
1937 Chrysler Airflow C17
...and way too many Bonus Built/Economy Built parts... http://www.bonusbuiltpanels.com/- under construction
PanelMan, I am new to the forum. I have a 1950 F-3 truck. What I am looking for is a piece of sheet metal about 1 foot square. It goes under the drivers side fender behind the front wheel. It actually is screwed onto the bottom edge of the cab and goes between the inner fender and the bottom of the front fender. My truck is missing the one on the drivers side. It looks like it got ripped off in the past. Tinman? says he has never seen one. Maybe they were not put on F-1s and F-2s. I don't know. I have picture of the one on the other side of my truck but don't know how to put it on this message. Thanks, 41505379 patrickmuenks at ymail dot com
PanelMan, I am new to the forum. I have a 1950 F-3 truck. What I am looking for is a piece of sheet metal about 1 foot square. It goes under the drivers side fender behind the front wheel. It actually is screwed onto the bottom edge of the cab and goes between the inner fender and the bottom of the front fender. My truck is missing the one on the drivers side. It looks like it got ripped off in the past. Tinman? says he has never seen one. Maybe they were not put on F-1s and F-2s. I don't know. I have picture of the one on the other side of my truck but don't know how to put it on this message. Thanks, 41505379 patrickmuenks at ymail dot com
Do you mean the splash shield? Is it something like pictured below? They need to be turned sideways. This design is for 48-51. In 52, the design was slightly changed on one side. The end was more curved for one side (don't remember which side off the top of my head).
If that is the part, then I should have a pair.
__________________
1951 Ford Panel
1952 Ford Panel
1937 Chrysler Airflow C17
...and way too many Bonus Built/Economy Built parts... http://www.bonusbuiltpanels.com/- under construction
yes, those are the splash guards I need. I did send you an email asking about your price. I really only need the drivers side but would be disappointed if I only bought that one and got the wrong one. Thanks, 41505379
Would you happen to have a battery box for a 48? That and one hood trim piece. Please email kylebonewitz@gmail.com at your convenience and ill keep thinking. Thanks
How about a pair of running boards for a 52 F1 shortbed?
__________________
Why is there never enough time to do it right the first time, but always enough time to do it again??
....Will work for Rep points....
How are you doing with your parts? I have a 1949 F-1
Everything is good. I still have a good inventory. What parts did you need?
__________________
1951 Ford Panel
1952 Ford Panel
1937 Chrysler Airflow C17
...and way too many Bonus Built/Economy Built parts... http://www.bonusbuiltpanels.com/- under construction
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
