1948-1952 Ford truck parts F1-F8
#106
07-09-2014, 08:35 PM
Category: Exterior - Body Parts
Price: $1
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): CRX & pre '92 Civic
Item Condition: CA
Shipping Information: Item can be shipped
Engine: Part suitable for gas truck, Part suitable for diesel truck
PM sent.
#108
07-20-2014, 01:48 PM
I have a friend in desperate need of 48-50 steel front lower fenders. I just needs one that are reasonably repairable, they don't have to be perfect. We're in Sacramento, we'll come pick them up with cash in hand as soon as you tell us to be there. Thanks for your help in advance!
#109
08-14-2014, 03:08 PM
New to site. Let me say thank you first. I have been doing my research on this site and your posts help. I am nearing completion of a frame off resto. on a 52 f-1 I'm looking for the hood emblem for a 52 F-1 6 cyl.
I know they are hard to find let me know if you have one. Thanks!
I know they are hard to find let me know if you have one. Thanks!
#110
08-14-2014, 04:26 PM
New to site. Let me say thank you first. I have been doing my research on this site and your posts help. I am nearing completion of a frame off resto. on a 52 f-1 I'm looking for the hood emblem for a 52 F-1 6 cyl.
I know they are hard to find let me know if you have one. Thanks!
I know they are hard to find let me know if you have one. Thanks!
Thanks.
#111
01-01-2015, 12:23 AM
PanelMan,
In this pic you posted: 9C0
759-B0B4-494E-B6A8-F7FCE31121F4-4212-000001B5194EA94F_zps53086a81.jpg Photo by modelking1 | Photobucket
There is a square hole that's been patched. I'm guessing for a grain chute? My M3 is an old grain truck, and I'd love to fill the hole with the sheet metal chute. Any chance you have come across one?
Also wondering if you have tail lights/brackets?
Truck is a '52 Merc M3
Thanks
John
Jweatherbie at gmail dot com
In this pic you posted: 9C0
759-B0B4-494E-B6A8-F7FCE31121F4-4212-000001B5194EA94F_zps53086a81.jpg Photo by modelking1 | PhotobucketThere is a square hole that's been patched. I'm guessing for a grain chute? My M3 is an old grain truck, and I'd love to fill the hole with the sheet metal chute. Any chance you have come across one?
Also wondering if you have tail lights/brackets?
Truck is a '52 Merc M3
Thanks
John
Jweatherbie at gmail dot com
#112
01-01-2015, 12:50 PM
Fleet Mechanic
Hood ?
Looking for a good hood for my 52 F1,also a good tailgate 51-52 and front ribbed bumper . I'm not made of money but will pay fair price. Something close to tx. Would prefer to pick up and pay cash.
#113
01-04-2015, 08:01 PM
hood emblems for 48 f1
I have a lot of 48-52 F1-F8 parts. I have trim, body panels, mechanical, emblems, etc. Did I mention that I have a lot? Please PM or email me with your wants.
I have running boards, tailgates, 48-50 F1 front fenders, 48-52 grilles, many trim pieces/emblems, mechanical parts, etc. I've been parting out trucks for several years and have accumilated a wealth of parts.
I have running boards, tailgates, 48-50 F1 front fenders, 48-52 grilles, many trim pieces/emblems, mechanical parts, etc. I've been parting out trucks for several years and have accumilated a wealth of parts.
#115
01-08-2015, 10:36 PM
F2 rear shock mounts?
Hi - newcomer looking for a set of lower shock mounts to accommodate a Ford 9" under my '49 F1. I believe a set of mounts off an F2 would suit me. Do you have any or know where I could locate some? Thanks in advance.
-Jon
-Jon
#116
01-08-2015, 10:42 PM
Oh and while you're at it, I'm in need of a spindle/steering arm - the curved arm connecting the spindle to the drag link and tie rod. Do you have one?
Thanks again,
Jon
Thanks again,
Jon
#119
01-22-2015, 08:19 PM