Anything wrong with the comp cams lifters?
#1
02-06-2013, 07:31 PM
Join Date: Aug 2011
Posts: 1,115
Likes: 0
Received 0 Likes
on
0 Posts
.
#2
02-07-2013, 10:49 AM
Postmaster
When people don't follow the proper cam break-in procedures and it leads to failure, who to you think they're more likely to blame - themselves or the cam/lifters?
Comp probably sell more cams and lifters than anyone in the US. That means plenty of opportunities for people to screw something up in the course of installation/break-in. It also means there are thousands of people out there running Comp lifters and cams with no problems.
Follow their break-in instructions to the letter and you should have no problems.
Comp probably sell more cams and lifters than anyone in the US. That means plenty of opportunities for people to screw something up in the course of installation/break-in. It also means there are thousands of people out there running Comp lifters and cams with no problems.
Follow their break-in instructions to the letter and you should have no problems.
Thread
Thread Starter
Forum
Replies
Last Post
walkee
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
37
02-21-2013 04:14 PM
F-250 restorer
Ford Inline Six, 200, 250, 4.9L / 300
2
12-28-2010 10:29 PM
ScottInTexas
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
6
06-12-2007 05:42 AM
tbolt 460
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
3
10-20-2003 08:57 AM
chopper
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
4
05-15-2001 09:45 PM