Apparently China has gone plaid!

China's Filthy Air Prompts Mask Rush, Cans of Fresh Air - ABC News








My new blang...

S80A, SL80A and a SN24C breaker bar.

 

looks expensive...

 

Yeah probably but you never know how much someone is willing to pay for a can of fresh air when the smog can literally be cut with a Ginsu

 

I think my 1/2 ratchet is bigger than your breaker bar

 

I think the "little" ratchet is 10" long, the longer ratchet is 15" and the breaker bar is 24".


Not doubting you but the only 1/2 drive ratchet that big or bigger that I am aware of is the SO SLF80a at like 24 1/2". The SLHF80a is about 3/4" longer but thats due to the crappy cushion grip

 

Mine is a Matco swivel head...



Next to elcheapo 3/4 drive breaker bar.

My other stuff I use the most is Stanley. In fancy case that's easy to toss in the back of the vehicle.

 

Mine is a swivel head...



Next to elcheapo 3/4 drive breaker bar.

 

SWEET! and you are correct.



Is that a HF breaker bar? Been meaning to pick one up.

 

It's a "grip" brand from "Mac's Hardware"

The one big issue with the ratchet is when you break the teeth or the shank, the tool guy doesn't want to warrenty it. N than accuses you of using a cheater bar.

 

In reality what else would you use a 24" ratchet for? SO would have to assume EVERYONE is using it as a ratcheting breaker bar.


I knew Ive seen one like that before.
Grip-On Tools JUMBO Mechanic's Breaker Bar — 40in., Model# 67330 | Ratchets Handles| Northern Tool + Equipment

 

I originally bought the ratchet when I worked at a GM dealership. The tcase plugs on them Chevys would get stuck like mad. 32mm socket. Made easy work of it, same with the rear diff check plugs.


But I use it a lot to break stuff loose. Like u bolts......