Oversize intake valves and stock pistons
#1
01-11-2013, 10:11 PM
Join Date: Oct 2010
Location: Boardman
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Oversize intake valves and stock pistons
I have a stock 1971 Lincoln motor in my old 3/4 ton that I've pulled the heads on and had them re-done. I have gone with 2.19" intake valves and 1.75" exhuast's. The cam is also stock. Does anyone know if there will be any interference with the pistons? They have the factory valve reliefs cast in them.
Thanks, Ron.
Thanks, Ron.
Thread
Thread Starter
Forum
Replies
Last Post
350on44s
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
22
01-24-2010 06:10 PM
Bobcat7
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
3
12-03-2009 11:42 AM