Let's welcome flyboy2610, our newest member!
Let's welcome flyboy2610, our newest member!
#2
01-06-2013, 03:41 PM
Posting Guru
Thanks, 97nukeford!
I would like to say greetings to all my fellow Huskers! (Next year will be better. We hope.)
It's good to be a part of this group, and I hope I can contribute something useful from time to time. I hope you will all forgive me for working in a factory that makes car parts...... for Honda. Hey, a job is a job, right? I run a 300 ton (capacity, not weight) stamping press and make various seat components, depending on which die is set. Right now the press line is doing 10 hour days, 6 days a week so that doesn't leave a lot of time for the computer, so don't think I'm ignoring you all or anything like that!
My truck, Frodo, is a 1969 Ford F250 Camper Special. He has a 360 with a C6, and a limited slip Dana 60 rear with 3.73 gears. He'll get 8 mpg rolling downhill with a good tailwind.
Some of the things I've done are: I removed this hideous monstrosity that a PO laughingly thought was a bumper/hitch and replaced it with a Starlight bumper from LMC. It has two rectangular lights in it. I wired the relay wire into the output side of the cargo light switch, so now the cargo light and the bumper lights all come on at the same time. That way I can hook up the trailer in the dark, if I ever have to.
I also installed a DrawTite hitch. I put in a Highliner headliner with 4 speakers and mounted a small CB radio in it. I put in a single DIN radio in the dash using a Metra stereo install kit. I installed a plastic firewall cover from LMC. Those original cardboard covers get pretty ratty after 40 years! I converted the front end from drum brakes to discs. And I found a topper that fits pretty good for $100. This past fall I replaced the king pins and the I-beam and radius rod bushings. I went with polyurethane bushings from Prothane. That made a world of difference in the ride!
Some of the future projects are: Installing the Old Air Products Slimline AC unit, along with a compressor and all related parts; putting in some high back buckets seats and center console that I got from U-Pull-It in Omaha; and repainting him a dark Hunter Green and off white.
I am currently in the process of rebuilding and repainting some doors, and installing power windows and lock with remote entry.
He is actually the second bumpside that I've owned. The first was a 1968 F100, which I turned into a trailer. His name is Frankie, short for Frankenstein, because there were parts from 4 different model years on him when I bought him! I think I'll paint him to match Frodo eventually. That'll be cool!
Here's a pic of both of them together:
Thanks for having me! (Although, perhaps I should be wary of associating with any group that would accept someone like me as a member! To paraphrase Groucho Marx.)
See ya around!
I would like to say greetings to all my fellow Huskers! (Next year will be better. We hope.)
It's good to be a part of this group, and I hope I can contribute something useful from time to time. I hope you will all forgive me for working in a factory that makes car parts...... for Honda. Hey, a job is a job, right? I run a 300 ton (capacity, not weight) stamping press and make various seat components, depending on which die is set. Right now the press line is doing 10 hour days, 6 days a week so that doesn't leave a lot of time for the computer, so don't think I'm ignoring you all or anything like that!
My truck, Frodo, is a 1969 Ford F250 Camper Special. He has a 360 with a C6, and a limited slip Dana 60 rear with 3.73 gears. He'll get 8 mpg rolling downhill with a good tailwind.
Some of the things I've done are: I removed this hideous monstrosity that a PO laughingly thought was a bumper/hitch and replaced it with a Starlight bumper from LMC. It has two rectangular lights in it. I wired the relay wire into the output side of the cargo light switch, so now the cargo light and the bumper lights all come on at the same time. That way I can hook up the trailer in the dark, if I ever have to.
I also installed a DrawTite hitch. I put in a Highliner headliner with 4 speakers and mounted a small CB radio in it. I put in a single DIN radio in the dash using a Metra stereo install kit. I installed a plastic firewall cover from LMC. Those original cardboard covers get pretty ratty after 40 years! I converted the front end from drum brakes to discs. And I found a topper that fits pretty good for $100. This past fall I replaced the king pins and the I-beam and radius rod bushings. I went with polyurethane bushings from Prothane. That made a world of difference in the ride!
Some of the future projects are: Installing the Old Air Products Slimline AC unit, along with a compressor and all related parts; putting in some high back buckets seats and center console that I got from U-Pull-It in Omaha; and repainting him a dark Hunter Green and off white.
I am currently in the process of rebuilding and repainting some doors, and installing power windows and lock with remote entry.
He is actually the second bumpside that I've owned. The first was a 1968 F100, which I turned into a trailer. His name is Frankie, short for Frankenstein, because there were parts from 4 different model years on him when I bought him! I think I'll paint him to match Frodo eventually. That'll be cool!
Here's a pic of both of them together:
Thanks for having me! (Although, perhaps I should be wary of associating with any group that would accept someone like me as a member! To paraphrase Groucho Marx.)
See ya around!
Thread
Thread Starter
Forum
Replies
Last Post
phayzer5
1973 - 1979 F-100 & Larger F-Series Trucks
12
03-24-2016 09:07 PM
jetjock16
1999 to 2016 Super Duty
10
06-14-2003 03:51 PM