i need your opinions i am doing an experiment with stock turbos and wheels i am planning to put on the nbs compressor wheel for its agressive nature and i was wondering which housing i should use on the exhaust side currently i am set up with 1.0 housing but stock wheel i have the original 1.15 housing on another turbo i can swap in as well i am not worried about the turbo removal and installation as it is a cake walk for me. thanks post up you opinion and why

 

bump?

 

Ronnie, I don't know enough about turbos to be of any help to you. I would like to learn more about the different turbo set ups. Travis would probably be the one to answer your turbo questions.

 

hope he can chime in

 

With a IC I'd do the 1.0 with nbs wheel

 

thats what i was thinking if it surges then pop it back off then go to the larger housing

 

I'd stay with the stock setup and the NBS wheel if you have an IC.