When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Voca, I pulled one of those 20' containers for a friend one time, even empty it was one of the hardest pulling loads on my 7.3. Not to mention I got lost going to get it in Chicago, Wrigleyville isn't really trailer friendly.
I searched for an SCS with a 460 intentionally because I'll be cutting both trucks and using the SCS back half on the Crew Cab, I found that SCS for $500 and needed the motor BAD.
The SouperCoupe is getting a 5 speed swap this very moment, ate 3 AODs in 9 months and waited 3 years till I found a manual one with a blown motor.
I searched for an SCS with a 460 intentionally because I'll be cutting both trucks and using the SCS back half on the Crew Cab, I found that SCS for $500 and needed the motor BAD.
The SouperCoupe is getting a 5 speed swap this very moment, ate 3 AODs in 9 months and waited 3 years till I found a manual one with a blown motor.
You are a brave soul. There is no way in he** that I could cut up an SCS.
Ok,,, I will add to the wood hauling theme, just because that is the only time I have taken a picture of him working, I took the pic to send to my wife and dad, this was July I think and I was sweatin like a stuck pig. "Woody" did his share too!
Oh,,, and Sid doing his part in Hunting, that is work,,, kinda