Im about to paint my dash on my 66 CC.

I want to replace the dash ***** and bezels. Everything works, the ***** are worn and the chrome on the bezels is pitted.

Im confused on what parts I need.

I looked at NPD, LMC, and Carpenter. Their catalogs do not seem to have consistant information.

What Im looking for is:

bezels for: ignition, lights, wipers, lighter, hazard light, hazard switch, choke, and heater.

***** for all the above, except the ignition switch and hazard light.

 

would re-chrome be an option?

 

I agree the Carpenter catalog sucks trying to figure out what is what but they have everything you need. Some slightly different in appearance than stock but decent. If you do not have them side by side knowone will be the wiser. I will try to find the proper numbers for you.

 

Wiper Bezel

http://www.parts123.com/parts123/yb....Z5Z5Z50000024G

Heater Control Bezel

http://www.parts123.com/parts123/yb....Z5Z5Z50000024G

Choke

http://www.parts123.com/parts123/yb....Z5Z5Z50000024G

Flasher

http://www.parts123.com/parts123/yb....Z5Z5Z50000024G

Ignition Bezel

http://www.parts123.com/parts123/yb....Z5Z5Z50000024G

glove box ****

http://www.parts123.com/parts123/yb....Z5Z5Z50000024G

Choke ****

http://www.parts123.com/parts123/yb....Z5Z5Z50000024G

Vent ****

http://www.parts123.com/parts123/yb....Z5Z5Z50000024G

Lighter ****

http://www.parts123.com/parts123/yb....Z5Z5Z50000024G

Auto Shifter ****

http://www.parts123.com/parts123/yb....Z5Z5Z50000024G

Headlight **** There are a couple possibles depending on which headlight switch you have

http://www.parts123.com/parts123/yb....Z5Z5Z50000024G

Radio Bezel

http://www.parts123.com/parts123/yb....Z5Z5Z50000024G

Wiper ****

http://www.parts123.com/parts123/yb....Z5Z5Z50000024G

Lights Bezel

http://www.parts123.com/parts123/yb....Z5Z5Z50000024G

Light bezel nut

http://www.parts123.com/parts123/yb....Z5Z5Z50000024G

White **** Insert

http://www.parts123.com/parts123/yb....Z5Z5Z50000024G

Turn Signal ****

http://www.parts123.com/parts123/yb....Z5Z5Z50000024G

 

I've purchase new ones from several vendors; but if yours are not real bad; onces remove take super fine steel wool and polish them and them use a black sharpee and repaint the lettering then wax them; you'll be amaze to the new look.

 

Thanks Boss.

I have a buffing wheel, I buffed a couple of them and Im not pleased with the appearence, so Im going to replace them.