40/20/40 seat

72CC428 · #1 (**permalink**) 12-13-2012, 12:58 PM

I have a 1972 F250. I am looking for a 40/20/40 seat for it. I was told that any F series truck 1996 or older that has this type of seat is a direct bolt in for my truck. If anyone has one or knows where I could get one I would appreciate the info. I have tried looking after market but I haven't foud anything. Thank you, Todd.

rmurphy · #2 (**permalink**) 12-14-2012, 07:39 PM

I used a seat from a 88' with the fold down center. Only thing u have to do is use your sliders (stud mount). Unbolt the sliders and Drill out the threaded holes in the 88' seat and put your old slider studs in the holes and tighten them down. I tried other seats, but you set to high.

72CC428 · #3 (**permalink**) 12-17-2012, 11:58 AM

Thanks Murph. Was this seat put in your bronco? Did it come from another Bronco? I don't know if the Bronco seats will work?

rmurphy · #4 (**permalink**) 12-18-2012, 02:15 PM

f-150 reg cab

72CC428 · #5 (**permalink**) 12-26-2012, 12:37 PM

Thanks Murph.

Just want to get it to the top again.