Crash's Nocturnal Overkill thread!
#1
Crash's Nocturnal Overkill thread!
Hi everyone.
I'm new to the forum, and have a bit of head start on my build...but I mod a lot, and post a lot--so I'm making a thread to put it all in instead of taking up a bunch of different ones.
Feel free to subscribe if you want to keep up with what's going on!
I'd love to hear all of your input, good or bad...just be honest!
Here's the truck so far:
2000 F-250 Supercab 4x4
7.3l D-Turbo-DI
Rhinolined exterior
Superchips Flashpaq
10" ProComp/Custom lift
40/15.5 Toyos on 22" XD Badlands with custom accents and center caps
AMP powersteps
100gal bed mounted tank w/pump (until it sells)
7" DVD touchscreen/Infinity/JL sound
Future Plans:
Better chip w/monitor
CAI
MBRP stacks w/6" chrome slash cuts
Custom box around stacks
Cut out Fender flares
Smoked lights
Custom grille- leaning towards modified 2007
I'm new to the forum, and have a bit of head start on my build...but I mod a lot, and post a lot--so I'm making a thread to put it all in instead of taking up a bunch of different ones.
Feel free to subscribe if you want to keep up with what's going on!
I'd love to hear all of your input, good or bad...just be honest!
Here's the truck so far:
2000 F-250 Supercab 4x4
7.3l D-Turbo-DI
Rhinolined exterior
Superchips Flashpaq
10" ProComp/Custom lift
40/15.5 Toyos on 22" XD Badlands with custom accents and center caps
AMP powersteps
100gal bed mounted tank w/pump (until it sells)
7" DVD touchscreen/Infinity/JL sound
Future Plans:
Better chip w/monitor
CAI
MBRP stacks w/6" chrome slash cuts
Custom box around stacks
Cut out Fender flares
Smoked lights
Custom grille- leaning towards modified 2007
#3
Whew.*
Pretty sure supercabs were never meant to have sub enclosures.*
By far the most complex design I've ever produced...especially for something to be so visually simple.
I really should have gone with 8s, but couldn't pass up a free JL 10.
I'm sure a Crew cab would have been a breeze, but the ext cab required ridiculous angles just to get a 10 to fit.*
Plus I wanted to integrate a storage area for jumper cables and basic tools.*
Ok. Mini-rant over.*
Just first time truck owner woes, I guess. Had to vent somewhere.*
May try carpeting again later...my seams are a bit rough, first time and all.
Pretty sure supercabs were never meant to have sub enclosures.*
By far the most complex design I've ever produced...especially for something to be so visually simple.
I really should have gone with 8s, but couldn't pass up a free JL 10.
I'm sure a Crew cab would have been a breeze, but the ext cab required ridiculous angles just to get a 10 to fit.*
Plus I wanted to integrate a storage area for jumper cables and basic tools.*
Ok. Mini-rant over.*
Just first time truck owner woes, I guess. Had to vent somewhere.*
May try carpeting again later...my seams are a bit rough, first time and all.
#4
#7
Thanks guys!
Just a few more little things this week...
I grew tired of my damaged front bumper, and have yet to choose a suitable replacement. So until i make a decision on my front end--I found a thick metal license frame, bedlined it, and mounted it over my dent. Problem solved! I may not even change the front bumper now!
Before:
After:
Went ahead and made a matching for the rear:
I added a smoked 3rd Brake LED.
And smoked vent visors that I'm not sure I like:
Smoked lights on the way for front and rear!
More pics soon!
Just a few more little things this week...
I grew tired of my damaged front bumper, and have yet to choose a suitable replacement. So until i make a decision on my front end--I found a thick metal license frame, bedlined it, and mounted it over my dent. Problem solved! I may not even change the front bumper now!
Before:
After:
Went ahead and made a matching for the rear:
I added a smoked 3rd Brake LED.
And smoked vent visors that I'm not sure I like:
Smoked lights on the way for front and rear!
More pics soon!
Trending Topics
#8
Man, you sure do like bedliner!
I have pretty much the same dent (maybe a little bigger) in the same spot. It annoys me, but I'll eventually get around to replacing it.
I would take off the half door vent visor and keep the front door visors on.
Keep us posted with all your latest updates and with the pics! Love pics!
I have pretty much the same dent (maybe a little bigger) in the same spot. It annoys me, but I'll eventually get around to replacing it.
I would take off the half door vent visor and keep the front door visors on.
Keep us posted with all your latest updates and with the pics! Love pics!
#10
Your truck looks like a perfect candidate for Ranch Hand bumpers.
Ranch Hand - The #1 Source For Truck Accessories
Ranch Hand - The #1 Source For Truck Accessories
#12
#15