I recieved my 55 f100 in pieces which is now posing some problems.

What I hope one of you have are some pre-teardown measurements.
What I need is the measurements from a stock truck from the lower edge of the front and rear frame rail to the ground and the bottom of the front and rear fenders to the ground.

Because I have swapped both front and rear suspensions I need these basic measurements to design and build my air bag spacers and set my ride height.

Thanks in advance for any info you can provide.

Gary

 

http://www.clubfte.com/users/earl/Re...%20Information

 

Thanks much Rich,,, Just what I needed.