I have a 1998 ranger 4.0 4x4 and was wanting to install an electric fan. I already have the dual fans off a windstar but need the thermo switch and the relay. I would like to use a stock windstar screw-in thermo switch and noticed that on my ranger there are 2 sensors that look very similar to the windstar switch right after the upper waterneck. So my question is can i use 1 of the 2 sensors already of my ranger to control the fan or some how use a windstar thermo switch in the ranger.I would like to keep it as stock looking as possible.

Here the windstar thermo switch
Buy BWD Coolant Temperature Sensor WT3058P at Advance Auto Parts



here the ranger sensors (not my truck but same thing)