Im wanting to grease my front wheel bearings but i do not know what grease to use. What grease are you guys using ?

 

This is what I use on my 4x4. 14 oz grease gun cartridge and applied through the ABS sensor hole. It is what was orinally used and no quessing.

 

Also:

Timken used Exxon/Mobil Infinitec 152, but it's not available in smaller quantities. I went searching for a more-available grease that was similarly-rated and came up with this Delo greases.

For something readily-available that's also very good, Mobil 1 Synthetic Grease is at most auto-parts houses.

Anything you use should be lithium-complex-based, and the use of any moly additive is debatable. Timken didn't.

For the procedure to do the service, see this photo.

Pop

 

I remember a while back someone had a fitting that they were going to build that would go in the ABS hole to allow you to grease easier. I was just wondering what ever came of these.

 

Riffraff Diesel: Front ABS Grease-able Block Off Fitting

 

wow, didn't know it was possible until reading the Link Pop posted... guess I'll be greasing mine before my trip to houston Thursday, considering i've noticed a lot of grease on the driver side that I was pretending wasn't there.