HEIDTS CROSSMEMBER MEASUREMENT FOR A 1956 F100

Reply Subscribe

Thread Tools

Search this Thread

10-28-2012, 06:38 PM

s-man56

Freshman User

Thread Starter

Join Date: Dec 2010

Posts: 42

Likes: 0

Received 0 Likes on 0 Posts

HEIDTS CROSSMEMBER MEASUREMENT FOR A 1956 F100

Took my 56 truck completely apart .took all the springs off and cut out the engine crossmember and transmission crossmember about two years ago . now I want to install a HEIDTS IFS . I need some help on where to line it up. should of thought about this long ago.I know you have to move it forward to line up in the center of the fender opening .If some one can give me a measurement from the edge of the closest crossmember to the forward edge of the HEIDTS crossmember I would appreciate it very much. thanks for any help

Reply Like

10-28-2012, 06:56 PM

3golfjack

Laughing Gas

Join Date: Nov 2006

Location: Olive Branch,Ms

Posts: 1,125

Likes: 0

Received 4 Likes on 4 Posts

Try this link.

http://www.heidts.com/_uploaded_files/in-039.pdf

Reply Like

10-28-2012, 09:37 PM

s-man56

Freshman User

Thread Starter

Join Date: Dec 2010

Posts: 42

Likes: 0

Received 0 Likes on 0 Posts

Thanks , all I have to do is grind off the paint where I filled the front shackle holes, the big hole, and measure from the center of it back 19 3/4 to the center of the crossmember or spindle. thanks again

Reply Like