Modifying a 351w
#1
#3
Also, Depending where you live and emissions, look at doing exhaust. Some states don't check for removed catalytic converters, but if yours does, they can be had for about $50 online for an aftermarket performance one. Look at a high flow exhaust manifold, or headers.
What gears did you put in? Hopefully 4.10's or thereabouts. That will make a huge difference. Put some pics up!
The airbox in those pulls in cold air from outside the engine comp., so I would stay away from mods other than k&N. Good luck and congrats on getting that stuff done!
#4
Cam it up man. Look around there are lots of cam options, with many different configurations (street, towing, mpg)..
Also, Depending where you live and emissions, look at doing exhaust. Some states don't check for removed catalytic converters, but if yours does, they can be had for about $50 online for an aftermarket performance one. Look at a high flow exhaust manifold, or headers.
What gears did you put in? Hopefully 4.10's or thereabouts. That will make a huge difference. Put some pics up!
The airbox in those pulls in cold air from outside the engine comp., so I would stay away from mods other than k&N. Good luck and congrats on getting that stuff done!
Also, Depending where you live and emissions, look at doing exhaust. Some states don't check for removed catalytic converters, but if yours does, they can be had for about $50 online for an aftermarket performance one. Look at a high flow exhaust manifold, or headers.
What gears did you put in? Hopefully 4.10's or thereabouts. That will make a huge difference. Put some pics up!
The airbox in those pulls in cold air from outside the engine comp., so I would stay away from mods other than k&N. Good luck and congrats on getting that stuff done!
Thread
Thread Starter
Forum
Replies
Last Post
compman
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
9
06-08-2015 07:18 PM
Bigblue351
1987 - 1996 F150 & Larger F-Series Trucks
17
06-18-2012 05:27 PM
402_best
1987 - 1996 F150 & Larger F-Series Trucks
4
10-11-2009 09:50 AM