2000 E-series unlock inop
#1
#2
#3
remove drivers door panel-4/5 screws around perimeter-lift panel upward to remove.
remove switch panel-brush off or blow out switch block contact areas.
the unlock switchs are grounded out somewhere, start there.
look at the wires on the body wall near your right foot, follow that harness thru the step up box under the door.
clean and repaint interior box !
remove switch panel-brush off or blow out switch block contact areas.
the unlock switchs are grounded out somewhere, start there.
look at the wires on the body wall near your right foot, follow that harness thru the step up box under the door.
clean and repaint interior box !
Thread
Thread Starter
Forum
Replies
Last Post
blandis
1999 to 2016 Super Duty
2
01-23-2005 02:35 PM