Twin Turbo blow through 300
#76
#78
I got the intake and exhaust manifold stuck on this morning. I used a Remflex manifold gasket, it seems very high quality.
I also mocked up all the piping for the intake. I never pictured it in my head being this cluttered, but baffle them with B.S, right?
I don't have the downpipe in yet, im waiting for some more parts in the mail before that does in.
Enjoy!
I also mocked up all the piping for the intake. I never pictured it in my head being this cluttered, but baffle them with B.S, right?
I don't have the downpipe in yet, im waiting for some more parts in the mail before that does in.
Enjoy!
#79
I'll work on it when I get off the rest of the week, and as long as there aren't any major issues, I should get it at least idling this weekend. I'm hoping to take it for a few low/nonboosted test drives.
I also picked up a Stage 1 Snow Performance Methanol/Water injection kit to keep this thing from losing it's cool.
I also picked up a Stage 1 Snow Performance Methanol/Water injection kit to keep this thing from losing it's cool.
#81
Thanks AbandonedBronco!
I got it running this morning, I need to fix a couple fuel leaks yet. I took it for a drive and so far it seems all right. Revving it sitting still makes a real nice turbo whistle out of the exhaust pipe like a diesel haha. Had me giggling like a schoolgirl.
Haven't put it under boost yet, I need to pull the carb and rejet it and I think I need to order a different powervalve for the holley....I know I have a cheap gauge but it shows 30" vacuum at idle and I have a 6.5 powervalve in it now.
My AFR readings were all over hell but I didn't hear any detonation even at 18:1.
Oh well, so begins the tedious process of tuning a blow-through.
I had a friend take a video and I'll see if I can post where to find it on youtube.
Not sure I can post URL, but search "Stone Phillips" on youtube. He has a channel with a vid name "Twin Turbo Ford 300 Straight 6". 39sec long.
I got it running this morning, I need to fix a couple fuel leaks yet. I took it for a drive and so far it seems all right. Revving it sitting still makes a real nice turbo whistle out of the exhaust pipe like a diesel haha. Had me giggling like a schoolgirl.
Haven't put it under boost yet, I need to pull the carb and rejet it and I think I need to order a different powervalve for the holley....I know I have a cheap gauge but it shows 30" vacuum at idle and I have a 6.5 powervalve in it now.
My AFR readings were all over hell but I didn't hear any detonation even at 18:1.
Oh well, so begins the tedious process of tuning a blow-through.
I had a friend take a video and I'll see if I can post where to find it on youtube.
Not sure I can post URL, but search "Stone Phillips" on youtube. He has a channel with a vid name "Twin Turbo Ford 300 Straight 6". 39sec long.
Last edited by AlphaZ; 10-23-2016 at 04:29 PM. Reason: Added youtube info
Thread
Thread Starter
Forum
Replies
Last Post
Twilight Child
Ford Inline Six, 200, 250, 4.9L / 300
16
11-23-2004 04:58 PM
BigJake86
Ford Inline Six, 200, 250, 4.9L / 300
12
10-08-2001 10:03 PM