Just took some pictures and will be uploading. As for the electrical tape, no spliced wires but that rubber boot that covers that bulb backing like the other one, just isn't there. The green wire on the one with the tape is wrapped all the way around and I'm not going to remove it as it's on there solidly. The loose electrical tape that was around the wires didn't effect anything, it was just there. I just found a box for shipping so I'm trying either UPS or USPS to see an approximate rate, any preference?
Oh, if you see a slit in the wires, that's because when the truck was wired for trailer brakes and such in the 70's/ 80's, they used a wire tap to connect to the wires so it's not like it was split, just a wire tap was used at that point.