You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Ford-Trucks Forums community today!
looking for someone i can talk to that has done a cummins swap on there 7.3l, my motor is well past its way out, and if im gonna start dumping the dead presidents this is seriously being considered. I know its doable, i just need to find out what you used, the issues you ran into, and a complete (or as close as i can get) to a parts list, so i can have everything ready to rock and roll once my truck gets back to my shop in ohio.
edit--more so specifically, wiring, and drive shaft lengths since i know the 4r100 gets moved a bit (even with the cummins to ford adapter and flex plate it still gets moved about 1/2 an inch if i recall correctly), and whether or not you used the cummins fan or bought the adapter to use the ford fan.
edit #2-- depending on what i find out ill keep you guys posted on here (might be a cummins conversion build, or a complete 7.3 teardown and rebuild with some special goodies)
2007 F350 Crew Cab Long Bed Lariat 4x4 6.0L
SB cold air intake, ARP Headstuds, Blue spring, stc fitting, updated stand pipes, RiffRaff IC Boots, Metal IC Pipe, EZ drain valve, MBRP 4" exhaust, Alliant Injector O-rings, SCT Livewire
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.