Can someone give me the measurements of the speaker and radio covers for a 1950? The PO had welded in a plate to cover a butchered dash (then butchered his patch) and I am trying to figure if the stock covers will cover his patch.


Also, how do you remove the stock wiper ****? I don't see a set screw and wanted to ask before I started prying.

Thanks

 

Pull the wiper blade out,than gently pry the arm off. No set screw. Speaker cover is 8 3/4x6 1/2. Cant help with radio cover

 

I have a piece of a 48-50 dash cut around the radio and about half way down into the speaker opening that would be great for patching.

 

There is no set screw for the wiper ****, it's just a press-on.

 

Thanks for the replies. I pulled the cab yesterday and it is currently lying on it's face as I undercoated the bottom last night. I will flip it upright tonight and take a closer look at the dash to see if it is salvagable.