Kelly Safari TSR??

<HR style="BACKGROUND-COLOR: #ffffff; COLOR: #ffffff" SIZE=1><!-- / icon and title --><!-- message -->G'day Fellas,

It has been asked some time ago; but I would like to see some more reviews on the Kelly Safari TSR.
They've been around long enough now to have enough fellas put enough miles on them on their trucks.
Especially like to know how they've behaved with the rear wheel torque produced by the heavy Diesel Trucks in particular the 7.3Ltr Trucks.
Towing with these tyres on these trucks? etc.

I'm considering fitting LT285/75R16/E 126P
Maximum Load Bearing Capacity (for a single tire) 3750lb @80psi.
I know they are Load Range 'E' which is equivilant to the old '10 ply Rating', however I'm finding it hard to confirm the 'side wall ply'.
I would hope it is '3 ply Side Wall'.

Cheers,
Reg

 

tap.tap.....tap.tap..........tap

 

I'm running the Kelly Safari's 285/75R16 E - no issues with them. I like them, and they do just fine towing.

 

I know this is not the same tire but. I have the Kelly Safari trek 285 75 16 e and I bought the truck with them and I have put 42k on them and im sure il get at least another 10 mabe 20k on them. Good lasting tire.

 

G'day Fellas,

Thanks for the feed back.
I seems very limited info is out there on these tyres. Especially on how they hold up on the heavier big diesel trucks.
It suprises me somewhat seeing they are an Iconic American brand and made in the US.
I know Kelly have been owned by Goodyear since around 1936 but have not been able to establish themselves (in seems) in the offroad/truck market.

Because of the limited feed back I've started to look at the Interco SS M16 Tires in the 295/75R16's Load Range''E'.
They are a little taller and would fill the wheel arc a little better as I have a 2.5" level/lift.
I believe they are targeted at the same slot between a Mudder and an AT tread?
Also not a lot of info on these even though they have also been aroung a while .

I must be picking the wrong tyres lol.

Cheers,
Reg
<!-- / message -->