You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Ok, it is set. The OK fall get-together (not GTG since someone recently asked me what a GTG is) is set for Saturday, September 15th starting at 1:00 PM. It'll be at my shop in Skiatook, but since I don't want to give out directions on the internet, if you don't know how to get here send me a PM or an email.
This is open to FTE'ers of all eras. And, it will be a family-friendly venue, so feel free to bring your significant-other and/or kids. However, we'll probably be using the lift, welder, or some other potentially dangerous equipment, so ..... And, speaking of using the equipment, we could do some light work on a vehicle, so come prepared if you want to work on your truck.
And, by the way, I have the FTE traveling banner that each FTE'er is asked to autograph. So, come to hang out, come to chat, come to work, but please come!
EDIT: If you are coming please reply to this post to let me know. Just trying to make sure I have enough snacks/drinks.
__________________
Dad's '81 F150 Ranger XLT 4x4 w/a 351M sporting an RV cam and Performer carb & intake/ZF5/3.50 gears w/Kevlar clutches in the rear LS, and sitting on 30 x 9.5 Starfire's wrapped around aluminum bullet holes
__________________
Dad's '81 F150 Ranger XLT 4x4 w/a 351M sporting an RV cam and Performer carb & intake/ZF5/3.50 gears w/Kevlar clutches in the rear LS, and sitting on 30 x 9.5 Starfire's wrapped around aluminum bullet holes
Hell yeah, I'll drive up from Cushing for this. Will have my little one along too most likely.
Great! Look forward to meeting you. Send me a PM for directions.
__________________
Dad's '81 F150 Ranger XLT 4x4 w/a 351M sporting an RV cam and Performer carb & intake/ZF5/3.50 gears w/Kevlar clutches in the rear LS, and sitting on 30 x 9.5 Starfire's wrapped around aluminum bullet holes
Army - I tried to reply to your email, but here's what I got: "Sorry! That user has specified that they do not wish to receive emails." So, I sent you a PM.
__________________
Dad's '81 F150 Ranger XLT 4x4 w/a 351M sporting an RV cam and Performer carb & intake/ZF5/3.50 gears w/Kevlar clutches in the rear LS, and sitting on 30 x 9.5 Starfire's wrapped around aluminum bullet holes
I am about 90% sure I'll be making this one too. Hopefully, I'll be bringing the 74. Haven't done much more to it in a while, thanks to the weather and lack of funding, but it should be up for the trip.
Quote:
Originally Posted by jwtimme
Army I live right at John Chrisner trucking if u wanted to follow me
If you guys want to cruise up together, I'd be down for that. I'm right close to that same area.
__________________
1980 F-150 300 I6, C6 & 9" rearend. The workhorse. 300K+
1974 F100 Ranger XLT 390, C6 3.25 axle. Dad bought it new, drove it over 500K. Now that he can no longer drive it came to me. Value: Priceless.
1983 Mazda RX7 1.1L Rotary. The show/autocross/toy. 231K
1995 Mazda B2300 (undercover Ford)
Hey Gary, thanks for hosting another of these events! I'll do my best to be there this time (I'll actually ask off from work to ensure that I can). I still have directions from the last GTG, so I'm good in that department.
__________________
1996 F-150 4.9 5-speed 2WD Short Bed
Planned modifications: 4WD Conversion, some engine mods that are EFI friendly
1983 F-150 Longbed Dual Tank, 300 I6, 0.040, RV Cam (Stepfather currently owns this)
Planned modifications: Offy DP Intake, 600 CFM Edelbrock Carb, EFI Exhaust, Walker Y Pipe.
Or a convoy. Watch out for the bear in the air there, Pig Pen.
__________________
Dad's '81 F150 Ranger XLT 4x4 w/a 351M sporting an RV cam and Performer carb & intake/ZF5/3.50 gears w/Kevlar clutches in the rear LS, and sitting on 30 x 9.5 Starfire's wrapped around aluminum bullet holes
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
