390 tranny combination
#1
390 tranny combination
I have a 76 crew cab with a 390 and a 4 speed. I am converting to a 7.3 powerstroke and automatic transmision. I have tentatively sold the 390 to a guy that is planning on using a c6 automatic transmission.
I need to know if the 390 is compatable (will assemble to) a c6 transmision.
Thanks,
76xltcc
I need to know if the 390 is compatable (will assemble to) a c6 transmision.
Thanks,
76xltcc
#2
Yes a 390 will connect to a C6, there are millions of them out there. They came from the factory that way.
The C6 will need to be one for an FE (360-390) engine though. C6's have an integral bellhousing and the FE bolt patern is unique to FE's.
This is an FE/C6 bellhousing, the bolt patern is circular.
The C6 will need to be one for an FE (360-390) engine though. C6's have an integral bellhousing and the FE bolt patern is unique to FE's.
This is an FE/C6 bellhousing, the bolt patern is circular.
Thread
Thread Starter
Forum
Replies
Last Post
jenkinsj
Clutch, Transmission, Differential, Axle & Transfer Case
6
07-12-2006 02:12 AM
mramc1
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
2
07-28-2004 12:06 AM