I'm looking for some stainless steel fuel lines for a 1978 F-250 4x4 with factory dual tanks.

I looked on line at both Classic Tube and In-Line tube without success.

Classic Tube offered to replicate my existing lines, but a previous owner spliced in an electric fuel pump.

Any recommendations?

 

Visit Speedway Motors for a tubing kit and fittings to bend up your own system.

 

I have a 78 F250 4x2 and bought all the pre-bent lines I could from Inline and then raw tubing from them as well. I bent the lines they didn't carry in a pre-bent version using a tube bender and the process was pretty easy. Grant it, bending 3/8 line is not as easy as bending the fuel vapor lines and brake lines but it wasn't that hard either. I used the old lines as a template and once I got the process down it went pretty well.