hello, I have been visiting the FTE website since I purchased my 77 f250 4x4 (351m) last March. Lots of very useful info to be found. Finally joined and have requested admittance to WA chapter so that I can meet/talk with the local crowd. Currently, I am going about trying to replace many of the "bolt-on" parts of the engine. I have already essentially replaced much of the front end (u-joints, axle races, brakes, etc.). Now I am having problems with the engine electrics. Have replaced the alternator (w/100A), regulator, battery, ig. module, ig. coil, etc. The problem now lies with getting a charge from the alternator. Can anybody reccomend a reliable mechanic in the south Seattle area w/ experience in the older Ford Trucks and their electrical systems?

 

I don't know a mechanic but in know some fellow FTE members though could give you some things to try, one is named GreyStreak92 Ford Truck Enthusiasts Forums - View Profile: greystreak92

This guy knows a ton about electronic stuff, and i highly recommend talking to him.

 

Thanks for the contact. I'll try to start a dialogue w/ Greystreak92. Pretty sure that its my miswiring the new voltage reg. plug.

 

It could be, shouldn't be too difficult to rewire. Also check your grounds and stuff to make sure it is all correct and not shorting.

 

Yeah me, I'm in Renton

 

How do you know your not getting a charge? What is your diagnosis from?

 

Spikechaser, were you able to find a good mechanic in the Seattle area who likes to work on old Fords? Am having trouble locating a good one, and may have bit off a bit more than I can chew on my new "old" truck. Thanks.