I have a 1989 F150 with a 5.8 and a C6 transmission. I pulled the transmission out of a junk vehicle and took the control as well as the Neutral Safety Switch. After having the transmission rebuilt I am trying to wire up the Neutral Safety Switch but the switch only has four wires and under the truck there is five wires. On the Neutral Safety Switch I have Pink with a orange strip, Black with a Pink strip, and two Red with a blue strip. Now on the truck I have Black with a Pink strip, Red with a white strip, Purple with a orange strip, Red with a blue strip and a white with a Pink strip. How can I go about wiring this up?

 

has anyone answered you about your prob? because i have an 1989 bronco with a 351 and c6 transmission also....and im havin the same exact problem as you are!!

 

join red with blue stripe together to bypass neutral safety switch but be careful as it will now start in gear.

 

My nuetral safety switch got pulled out and chewed ip by the dogs. Do you even really need it or can I bypass it completely?

Sent from my Galaxy Tab 3

 

see my above post