Summit Racing SUM-380431 - Summit Racing Street & Strip® Aluminum Race Radiators - Overview - SummitRacing.com

Need one for my 460 in my 79 4x4.

 

Not for a 460

This one is a 3 Row which would be more along the lines of what u need. I prefer the 4 Row but do cost alot of money
Vista-Pro Ready Rad 433433 - Vista-Pro Ready-Rad Radiators - Overview - SummitRacing.com

 

The plastic is only the downfall of that radiator to me

 

I hear ya on that.. was just grabbing a fast example. Look for a 3 Row and you'll want a fan shroud too

 

LMC Truck Parts - Page 37

Look at OEM specs and I'd go for one like it

 

What's wrong with a 2 row?

 

The more Rows the radiator gots the more heat its gonna suck from underneath the hood... Im sure a 2 Row would work but if you have to spend money on a radiator, minus well get one that will cool down that 460 decently
But that is just what I would do...

 

I bought one of those direct fit plastic ones from summit for a quick fix until I buy the more expensive all aluminum one. And its holding up good a couple years later.

 

I bought this 3 row for about $150 off of ebay from Champion. It is a perfect fit and seems well made.

 

I have the same one as MaulMaul. South Ga heat no fan shroud idling at a stop light after running hard, temp crept to 210 and shot down to 190 in a second.... no problems. been 2.5 years or so.

 

I am looking to get a new one also. I need to get a rear flange mount so i am limited to an oem one. I cant find aluminum ones with rear flange mount. LMC does have a 3 row rear mount so i think i will go that route.

 

I bought a new one from O'Reillys for a '76 F-100 with a 360 for around $200, all metal and bolted right in.