'95 Aero Ignition Switch failure
#17
Final tip:
Be sure the actuator is fully pushed forward before going on with reassembly. It will be not possible to reinsert the key/lock cylinder without doing so. I was able to move the actuator forward with a small screwdriver through the empty lock cylinder space in order to complete the job, but if it is pushed forward earlier, the cylinder will reinsert cleanly without adjustment.
Hope my experience helps.
Be sure the actuator is fully pushed forward before going on with reassembly. It will be not possible to reinsert the key/lock cylinder without doing so. I was able to move the actuator forward with a small screwdriver through the empty lock cylinder space in order to complete the job, but if it is pushed forward earlier, the cylinder will reinsert cleanly without adjustment.
Hope my experience helps.
Thread
Thread Starter
Forum
Replies
Last Post
bpech69
Explorer, Sport Trac, Mountaineer & Aviator
3
05-12-2013 10:33 AM
campbells111
1987 - 1996 F150 & Larger F-Series Trucks
2
02-06-2009 12:00 PM
mbmclane
1987 - 1996 F150 & Larger F-Series Trucks
5
01-24-2009 10:05 PM
samandiriel
Explorer, Sport Trac, Mountaineer & Aviator
12
10-30-2003 01:53 PM
taketheredpill
1987 - 1996 F150 & Larger F-Series Trucks
3
08-09-2003 10:29 AM