You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
So, we have an esteemed guest in our midst, so a summer get together would always be a nice thing... Baby Bunny is hanging out in our neck of the woods playing with the wind generators that are popping up around the western part of the state. Anyone up for a meet? A thought is that we could check out the Good Guys show in Des Moines the weekend before the 4th of July weekend. Otherwise we can make a meet another time if the consensus is to have a less crazy venue... Post up ideas/opinions.
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
Feel free to suggest a workable date, that is what the thread is here for.
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
I know I'm late on this thread but as an aside, if you guys are in town (Des Moines) to check out Good Guys, you are welcome to swing by and look at my junkyard of a garage/f100 projects and have a beer or two...
Jason in Granger
__________________
Proud member of No Sympathy truck club
Was planning on getting there, now I'm not so sure, seems the wife's ex is managing to screw things up yet again... I seem to be destined to not make it, been trying to get there for several years, but haven't made it so far. However, I will be in town next Friday for an interview at Gits Mfg in Urbandale.
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
well if you have time built into your schedule next friday, I will be gettin dirty in the garage. Granger is 5 miles or so NW of Urbandale... I will have the beers cold.
__________________
Proud member of No Sympathy truck club
well if you have time built into your schedule next friday, I will be gettin dirty in the garage. Granger is 5 miles or so NW of Urbandale... I will have the beers cold.
I would have come by if my mom didn't need her car back... I had to borrow it so I could look decent, hard to do when driving with the window down in this heat...
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
