looking into that. didnt find what you described yet...but found this old thread
https://www.ford-trucks.com/forums/6...hts-oh-my.html

i guess a complaint is that the factory fogs arent bright enough. well by design, fog lights arent meant to be brighter, they are meant to be diffused light. meaning non focused, aka opposite of headlights. reason being, in fog, light refracts (bounces) off the moisture in the air and causes undesireable effects which can impair the driver. fog lights are diffused light which aid in lighting the path without bouncing light back at the drivers eyes.

 

My stepson has the rigid industries light bar and driving lites that light up the night...
just pricy :
2011 & 2012 F250-F350 20" Lower Grill Kit

Mama has approved them !!!! so just need to find the best source for either them or the clones that are now coming out...

 

they look ok. but how they are at night is what i wanna know. hint: pics

 

I was so impressed by the fog lights I went ahead and got the headlight and fog light replacements. I'm going to instal them myself this weekend. If you have already installed please post or email me your experience. I think Epic may have done a video on this involving removal of the grill and 4 screws per headlamp. This should be rather simple but give me a heads up if you can.

 

Haven't got to the lites yet... still sitting right there next to the laptop


BUT, I did get my new toys in...
installed the McGard tailgate lock in about 1 minute!
installed the DeeZee tailgate assist in about 20 minutes (since their instructions were SO horrible and they left out a BIT of information....
(like what IS a nutsey ?!?!
and when u say use the M6 Allen and a 13 MM wrench to tighten it down...
what do u mean - tighten the lock nut, the m6 allen wrench, the 13 mm wrench-
OH ! you mean turn the allen wrench counterclockwise and the 13 mm wrench holds it in place !!!!
and count 9 turns when u only have roon to do it an 1/8th of a turn at a time ??!?! ?
why not give us a torque setting ?!!?)

but in spite of that got it done and it works GREAT.... so far ! worried about the nutsey or whatever they call that....

drops quickly to within 2 inches of level then slows down perfectly....

no real help in lifting it up .. but great to drop it and no BANG !

Now, pre-fitting my bed side step !!!

 

No need to put two - it handles the step tailgate perfectly !!!

drops quick and then slows to a stop

 

we're getting ready to buy a mvp Destiny, trying to figure out which truck to use to tow it. Any suggestions greatly appreciated! Thanks!

Mommabond

 

glad to try to help so you can avoid my dead ends
check your pm - and give me a call to discuss if I can help !

 

I ordered one yesterday to go with the new lid. It's a big gate and I don't want my kids to get hurt. They are always opening it up at the soccer fields. My little guy is only 10 and he barely can open it by himself (safely).

 

then he'll like it and you'll feel safer with it !

the instructions miss steps and their online videos don't match either so try the install when they are open or give me a shout - glad to help....

 

If you don't mind, could you take a picture of it installed in yours and post it or PM it to me? That would help a ton. No hurry...it won't be here until Wednesday or Thursday of next week.

 

sorry, I'm a real novice here, where do I find the pm?

 

scroll all the way to the top of this page (right hand side). Under your user name, is the "Private Messages"

Click on Private messages and it will take you there.

 

Thanks Savage !
on edit
see below - have a video too if you'd like: http://youtu.be/dO0WHyKWW1I


and guess what mommabond- your pm won't be there - you're still too new for pm's - sent an email thru FTE instead....

 

I haven't gotten it yet, but I'll reply as soon as i get it...thanks.