IGNITION SWITCH FOR MY NEW HARNESS
#1
IGNITION SWITCH FOR MY NEW HARNESS
Hi,
I replaced my old wiring harness out of my 77, F250 inline 6, with a harness out of a 79 F250 with a V8...
My old ignition switch connection off the harness is black and slightly larger than the grey connector off the new harness.
I ordered by mistake a 79 V6 ignition switch that is massive compared to the both previous both the one from the old harness and the one from the new harness.
My question after looking at rockauto's part pictures, is are the switches different for the 8 VS 6, the 79' switch for the 8 looks close.
Here is a picture of the grey connector off the harness, hopefully someone can idenitify which specific ignition switch I should ask for!
THANK YOU
I replaced my old wiring harness out of my 77, F250 inline 6, with a harness out of a 79 F250 with a V8...
My old ignition switch connection off the harness is black and slightly larger than the grey connector off the new harness.
I ordered by mistake a 79 V6 ignition switch that is massive compared to the both previous both the one from the old harness and the one from the new harness.
My question after looking at rockauto's part pictures, is are the switches different for the 8 VS 6, the 79' switch for the 8 looks close.
Here is a picture of the grey connector off the harness, hopefully someone can idenitify which specific ignition switch I should ask for!
THANK YOU
Thread
Thread Starter
Forum
Replies
Last Post
Imallearsfor59s
1957 - 1960 F100 & Larger F-Series Trucks
3
10-13-2018 04:34 PM
Evan's F250
1973 - 1979 F-100 & Larger F-Series Trucks
3
12-18-2012 12:39 AM
F250GH
1961 - 1966 F-100 & Larger F-Series Trucks
3
01-25-2009 09:08 PM
1978fordf250
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
8
08-15-2008 03:38 PM
bigredtruck
1973 - 1979 F-100 & Larger F-Series Trucks
9
01-29-2006 01:03 PM