You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I recently had a brake shop replace everything on the rear brakes. About 200 miles I stopped at a red light to have smoke coming from the left side of the wheel. I looked where the smoke was coming from and noticed it was coming from the drum. I removed the drum and found a bunch of dust.
What my main concern is the axle, is it suppose to move in and out about an .125? 1/8th
There is a little axle movement in and out. The smoke sounds like you might have a brake shoe hanging up; adjuster not set up properly maybe.
Intercooled Vortech, Victor Jr. heads, roller cam, 62lb injectors, 2800 stall converter, Eaton Locker, Pickrel Headers and Exhaust, FMS Mass Air using SCT tuning software. Road trip and dragstrip ready!
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.