I'm looking for a working EGR valve. I did the EGR cooler delete but my valve is still installed. I have a couple of soft codes I would like to get rid of. So if someone has theirs that they took out and don't want, I would like to see if that removes my codes. I'll pay for the ride of course.

 

If no joy here, they run $17 to $20 bucks online.

Stewart

 

Thanks, I will probably have to get that. Cheapest I saw was around 30 but that was a quick scan.

 

Hi all!

I'm looking for the runningboards for a 2000 excursion XLT. Mine are in tact on the top, being the plastic side with the lighting, but the metal panel that runs the full length of them underneath that provides the support to them is all rotted away. Looks like most of my brackets are still good even though they are rusty it's more the support piece that gives the Runningboard it's rigidity that shot on both sides! Anybody have any Runningboard sets where that piece is intact that they're willing to part with? And even if it's only one side or the other I'd be willing to do one side at a time if it was available.

Thanks in advance!

 

Looking to see if I can get my hands on a couple more crossbars and the little tiedown loops that go on to the factory roof rack on a 2000 Ford Excursion XLT anybody have any of the bars or the tiedowns that go on the rack?

Thanks

Mike

 

its 2015 and about 1650 miles from central texas to sacramento. but if you are in the neighborhood feel free to stop by and pick up some FREE parts.

 

Looking for a swap. I've got a 2000 4x XLT. Lifted and on 16.5 centerline's wrapped in 37" BFGoodrich. Lookin to go back to stock. Anyone in SoCal (LA) area willing to trade parts?

 

I might be interested, I'm up by Tahoe so we'd have to schedule a weekend or something.

Are you taking the lift off too, Im sure 37's won't fit my currently stock truck, and stock tires/rims will probably look a little goofy on your lifted rig. What brand is the lift and how tall is it?

 

LMFAO!!!!

 

Wow, Tahoe is a little away lol. Yes, the plan is that the lift would go too. In all reality, I don't know for sure how high the lift is. I know that it's high enough that she needs 3 blocks on the back to level with the front. Everything looks clean and are Pro-comp. I've got some pictures, but I don't have enough posts to upload.

 

Yeha it's hilarious, & nobody still will not know if the parts he has will work for their truck

 

if you want you can e-mail me, and then I'll share my phone number. Abbottbd is my user name and I have a gmail account. Hopefully you can figure that out and the bots can't.

 

Wow, talk about triple unsafe.

Stewart

 

Hopefully someone has a passenger paddle mirror they want to get rid of. Mine from an 03, with heat and signal got broken. Anyone willing to get rid off one? Thanks

 

Noob question then..... Why? It's the exact setup that 4wheelparts installed. I doubt they'd let it leave their shop unsafe to drive.