You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Got a question. I currently have a 351w with a C6 behind it. The motor is shot and I would like to put another 351 in but I have a chance to get a 302 pretty cheap. I just want to make sure this engine/tranny combo will work, and if there is anything I have to change or convert to make it work.
__________________
Rick Kerfoot
89-F250 Project truck
It will work, they're both small blocks, so you could even use your trans. You will need the computer that goes with The 302/c6. You will also need the exhaust crossover from the 302
__________________
Charlie slackmaster #26 "A common mistake people make when trying to design something completely fool proof, is to underestimate the ingenuity of a complete fool."
Quote:
Originally Posted by 67nukeford
Charlie, don't make me come there and kill you...
"If more sane people were armed, the crazy people would get off fewer shots."
I knew there were different computers for the motors I didn't realize it was for the tranny too. I will see if the sell has it by chance. If not how hard is this to find?
__________________
Rick Kerfoot
89-F250 Project truck
I think last year for the c6 was 87. How's your trans?
__________________
Charlie slackmaster #26 "A common mistake people make when trying to design something completely fool proof, is to underestimate the ingenuity of a complete fool."
Quote:
Originally Posted by 67nukeford
Charlie, don't make me come there and kill you...
"If more sane people were armed, the crazy people would get off fewer shots."
e40d? I'd try to get a computer for that, o/d is much better on gas, been there, done that.
__________________
Charlie slackmaster #26 "A common mistake people make when trying to design something completely fool proof, is to underestimate the ingenuity of a complete fool."
Quote:
Originally Posted by 67nukeford
Charlie, don't make me come there and kill you...
"If more sane people were armed, the crazy people would get off fewer shots."
Make sure to get the computer. You may also need the linkage that shifts the trans, and any wiring harness related to the trans. I'm not sure if there's a neutral safety switch on the c 6 or not, so you want to check that out.
__________________
Charlie slackmaster #26 "A common mistake people make when trying to design something completely fool proof, is to underestimate the ingenuity of a complete fool."
Quote:
Originally Posted by 67nukeford
Charlie, don't make me come there and kill you...
"If more sane people were armed, the crazy people would get off fewer shots."
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
[/SIGPIC]George 54 F100, 78 F150, 79 F150, 86 F250, 87 F250 Member #5 Boy you ain't Right Club Official Slackmaster #15
