Hey guys, I'm looking for a 78-79 power steering box, I need the output shaft from it. I sent the one I had down to Benchworks in Scottsdale, AZ, to have it reversed ratio'ed to work on my 67, but they say the output shaft that the pitman arm goes on is twisted, and they don't have one. So, I need to find a shaft to send down to them. Anyone close to the Omaha area know where I could snag one of these power steering boxes would be enormously useful!

Thanks!!!

 

half ton or bigger

 

Half ton. Sorry, forgot to include that!

 

Not sure if it will fit or not, I'm a little out of practice on my parts swapping. I have a 77 2wd f150 power steering box just sitting on my parts truck I would be willing to part with.

 

Thanks Tim, but I have to have the 4x4 one. I asked the guys down at benchworks about that. Too bad, since I've found several of the 2wd boxes! I appreciate the offer, though!

 

sent you a pm

 

Got it Jason, thanks!

 

When went to the scrap yard today and...


they were closed. : ( They are only open on Saturdays from April to October, but I had it in my head that they were open today. Old age I guess.

I will stop in Monday, got a small load of scrap I want out of the way, hence the reason for the trip.

 

I do have a 4x4 box I picked up when I thought my box was bad. I got from action truck parts in CB.
Let me know, I gave $70 for the box.

 

Yeah, that would be great! Here is my email, if you want to shoot me your phone #

pwilhelm@oppd.com

 

So you set? Sorry I just haven't had anytime to get to jy.

 

Meeting up with Pat tomorrow, so unless he meeds a second spare box
Too bad it's not a Torino box. I have 6 of them.

 

Andrew, it was nice to get to meet you. Thanks for hooking me up, the output shaft is on it's way to Arizona as we speak!