Having trouble finding a throttle bracket.But my beater is up and running better than ever but cant drive till i get my bracket .

 

What is a throttle bracket? And, what engine?

 

The throttle cable bracket that gets hooked onto the back part of the intake.its a 302 but its got a edelbrock intake on it

 

I have one that came off a 460...not sure if it'll fit but kept it just in case someone needed one

 

Well the stock one off the original intake is slanted on the part you bolt to intake. My new intake is a straight one.

 

This is what I got...measures 1.5" between the bolt hole centerlines

 

the holes are right but i need one that the throttle cable goes straight instead of to the left

 

I may have to rig one up to work or bend the old one and shave it down some to work

 

sorry bud!!! If my welder was working I'd cut / weld it to what you need

 

actually i just now found it online gonna have it in four days sweet.Cant wait to have her back.And thanks a lot man its awesome knowing there people out here trying to help

 

searched everywhere finally found.

 

Got her up and running but i need to re due my vacuum lines. Anyone have a vacuum hose diagram ford a 1981 ford f100. ive got the haynes manual but cant find it in the book.

 

What engine? And, CA or 49 state version? The F100's and F150's should share the vacuum layout up to the heavy duty version of the F150, so that makes it easier to find one. But, they are engine and maybe transmission dependent, and I think the CA ones had different emissions equipment, and therefore vacuum lines, than the 49-state versions.

I have the 49-state diagram for a 351M w/a C6. What's your config?

 

nah im in Kentucky so no emission restrictions its a 1981 ford f100 with a 302. got a Holley 4 barrel 600 on it.

 

I am not sure of the transmission.