78-79 Tilt Column

bpatton74 · #1 (**permalink**) 02-25-2012, 03:05 PM

I am looking for a 78-79 Bronco automatic tilt column in good shape....

wdfp · #2 (**permalink**) 02-28-2012, 05:01 PM

Are you looking for a bronco with a column or just a column?

bpatton74 · #3 (**permalink**) 02-28-2012, 06:32 PM

Gotcha, I fixed it... Just the column....

VocaTexas · #4 (**permalink**) 03-01-2012, 01:21 AM

I ran across this a while ago looking for something else. Looks like what you're after:

78 - 79 ford truck f series bronco 4x4 tilt steering column wheel 73 74 75 76 77 | eBay

Good luck!

bpatton74 · #5 (**permalink**) 03-01-2012, 05:07 AM

Thanks, just placed a bid....

wdfp · #6 (**permalink**) 03-02-2012, 06:57 PM

Maybe I should list the one I have if that one goes much higher, I didn't think they went for all that much..

bpatton74 · #7 (**permalink**) 03-02-2012, 09:13 PM

Quote:

Originally Posted by wdfp

Maybe I should list the one I have if that one goes much higher, I didn't think they went for all that much..

How much do you want for yours?

wdfp · #8 (**permalink**) 03-03-2012, 01:05 AM

I haven't really thought about it much, was going to put it in my 77, its from 79 f150 2wd but it has the splines on the bottom for the rag joint so it will work on either 2 or 4wd as far as I know. its tilt cruise and automatic too. steering wheel has a couple cracks in it though. I'll look at it real close tomorrow but I think its in better shape than the one on ebay...

bpatton74 · #9 (**permalink**) 03-03-2012, 07:37 AM

Quote:

Originally Posted by wdfp

I haven't really thought about it much, was going to put it in my 77, its from 79 f150 2wd but it has the splines on the bottom for the rag joint so it will work on either 2 or 4wd as far as I know. its tilt cruise and automatic too. steering wheel has a couple cracks in it though. I'll look at it real close tomorrow but I think its in better shape than the one on ebay...

Nice, either way let me know...

wdfp · #10 (**permalink**) 03-06-2012, 08:42 AM

I see that one went for nearly 200 and shipping, did you end up with it? Guess I should take some pics and list it if I'm not going to use it..

bpatton74 · #11 (**permalink**) 03-06-2012, 09:32 AM

Might be a way to make some money. Nope, I did not end up winning the bid. My max bid was $175. O-well maybe next time...

F350SuperCab4x4 · #12 (**permalink**) 06-17-2012, 05:22 PM

i have a few if you didnt get one yet. also have the igntion housing off of a 79 Mark V tilt(same as truck column) so you can lock the column like on the chevy trucks. $250

bpatton74 · #13 (**permalink**) 06-17-2012, 06:24 PM

Thanks but I found one on ebay last week and I forgot to update..

Thanks again

lisagoud · #14 (**permalink**) 06-23-2012, 03:29 PM

I'm still looking for one for a manual