hello,

I just picked up a beat up 85' F250 4x4 diesel. It has what looks like a 4" or 6" lift on it and a drop pitman arm. i plan to swap my d60 under it soon and lower it back down as close to stock height as possible.

Will a pitman arm from a 94' F350 4x4 fit on it? There is one in the junk yard right now (axle is gone of course) but the drag link and pitman arm were on it last weekend, im hoping to go back today and find it still there.

Thanks,

 

An F350 pitman are fit but it is not the same as a F250 one

 

whats the difference?

or what about an F250 2wd truck?

 

The pitman arm from the F350 4x4 should fit but any pitman arms off a 2wd wont be the same as a 4x4.

 

got it,

thanks johnny!

 

Since you are going D60, go with the F350 arm.

 

Looks like I was a day late at the JY today. The whole truck was gone! Not another 4x4 in sight... Guess I'll have to keep going back

Thanks for the replys!

 

oops wrong thread. I meant to post in another one