Well i have my rotors, calipers and i found the right hoses for my disc brake swap on my 55 f100. Now I need suggestions for the bracket to mount my master cylinder and booster. I want to mount this in the stock location. I have a floor mounted 3 speed. I also have questions about adjustable proportioning valves. Any recommendations would be appreciated.

Jerry

 

MidFifty (and others) sells a bolt on bracket for booster based masters under the floor.
(I am using one for my setup)..

what questions on the prop valves?

Sam

 

I have an underfloor bracket and manual dual circuit disk/drum MC I'm not using.
I'd recommend buying a proportioning valve matched to you brake combination, and trying it. Then you can put a simple inline adjustable valve into whichever line you feel needs reducing if needed.

 

my question was do I need to put in a adjustable proportioning valve along with the valve you can purchase from mid fiftys for front disc rear drums. And Axracer will the bracket you have support a power booster bolted on? and can I use this with my three speed?

Jerry