When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 390 in my panel, with the stock steering box. I was wondering if there are any off the shelf headers that would fit? If so, what brand and where to buy them from? Thanks in advance!
The ones I have are the FF427. They fit 390 - 428 cid in 1953-up F100 pickup. Summitt has then for the cheapes price or you can order them from Sanderson.
How is starter clearance with the headers? Ive always thought about running headers but at the same time i don't want to have to take them off to change a starter.
I´m running Sanderson hugger headers in my `60 with a 400, no problems with clearance on starter and steering column. They fit very well, good quality !
I have a 57 F600 with a 390/5spd/2spd . I used a set of headers from a 75 1/2 ton pickup with a 360 2wd. They fit OK-- very tight on the steering box and the starter. Made quite a difference in power .