You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I'm looking for a pair (or one if thats all you have) of the following mirrors. I know they were available on the pre-77.5's and I don't care if they're white painted steel or stainless. They have three mounting points and I believe the mirrors are about 4"x6". Here are the pics of the mirrors I'm looking for:
I'm looking for a pair (or one if thats all you have) of the following mirrors.
I know they were available for 1973/79 F100/350 & 1978/79 Bronco, white painted steel only, stainless never offered.
They have three mounting points and I believe the mirrors are about 4" x 6" 6 1/2" x 9 1/2" mirror head.
The following are FoMoCo Dealer installation kits, came with everything necessary to install them / The mirror head (D2TZ-17723-A ~ R/L is the same) could be purchased separately, 21 are available NOS
D3TZ-17696-E .. Left Side Western (aka West Coast) High Profile Outside Mirror-White Painted Finish / Obsolete
NOS PARTS SOURCE in Olathe KS has ONE = 913-220-5746.
CARPENTER NOS OBSOLETE PARTS in Concord NC has FOUR = 800-476-9653.
-------------------------------------------------------------------------- D3TZ-17696-F .. Right Side Western High Profile Outside Mirror-White Painted Finish / Obsolete
FITZPATRICK & LAMBERT in Dushore PA has ONE = 570-928-8183.
No other Ford Dealer or obsolete parts vendor has either side.
__________________
Bill // Retired Ford Parts Manager // SoCal Chapter member // Part Number Research: 1928/2001 FoMoCo vehicles.
One last question, is there inserts that go in the doors to mount these? If so are they available?
These are dealer installed kits, so everything necessary to mount the mirrors should be included.
The three arms bolt to brackets that bolt to the doors. One above the vent window, one below the vent window, one at the front of the vent window.
There is an exploded view of all the parts of this mirror in the 1973/79 Ford Light Truck Parts Catalog ~ Illustration Section 176.1 - Page 3 - lower pic.
FTE member mikeo0o0o0 has the catalog on a CD, can scan and post pics. This CD catalog is available from hipoparts.com
__________________
Bill // Retired Ford Parts Manager // SoCal Chapter member // Part Number Research: 1928/2001 FoMoCo vehicles.
I've got a full set of those. One set from the '73-'79 body style and the other I think from the earlier style as it has a different bend in it or maybe it's just shorter but for the same style, I dunno.
Plus I have all good glass for them. One or two of the 4 I have is missing a few bolts to attach it but the mirrors, plates and tubes are still there. One mirror has the convex mirror on it. Will get pictures Wednesday sometime when I'm back out at the truck.
Just found this picture from over the summer. I believe I have the surroundings for the singular mirror in the picture as I have moved around things since I took it.
Thanks NumberDummy, I ordered a pair back in January, and need one RH side to complete another set. Maybe I'll just order one of the LH mirrors and see if I can make it work for the driver's side. Thanks again
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
6 1/2" x 9 1/2" mirror head.
