Jan, 2012 Junk Yard Wishlist
#1
Jan, 2012 Junk Yard Wishlist
This was a neat idea, thanks again to whoever suggested this!
Last month's will be unstuck and closed.
Post your wants & needs here, even if they were on last month's list; there's enough chatter on the old one it gets hard to know if somebody is still needing a part or not without reading through the entire thing.
Please keep monetary-transaction talk amongst yourselves - in PMs or e-mail.
It's fine if we want to give/sell things to each other but we can't be running a Flea Market or Auction House here, that's against the spirit of what we do here - people helping each other.
You might also check out the 80-86 Truck Parts - Free to a good home thread.
-chris
Last month's will be unstuck and closed.
Post your wants & needs here, even if they were on last month's list; there's enough chatter on the old one it gets hard to know if somebody is still needing a part or not without reading through the entire thing.
Please keep monetary-transaction talk amongst yourselves - in PMs or e-mail.
It's fine if we want to give/sell things to each other but we can't be running a Flea Market or Auction House here, that's against the spirit of what we do here - people helping each other.
You might also check out the 80-86 Truck Parts - Free to a good home thread.
-chris
#2
I'm still looking for a 1980-1984 Rosewood radio bezel that says "XLT" and has the factory clock cut-out. Even if you just see one for sale on another site feel free to throw me the link.
#3
looking for wagon wheel rims for an 83 F350 4x4. and a 81 F150 4x4 color doesn't matter. send pics via pm.
also looking for a spare tire mount for the box of the 83 F350.
also looking for a spare tire mount for the box of the 83 F350.
#4
Looking for a nice radio delete panel, grey mesh color with silver accents, P.N. E2TZ-10044D70-H or E0TZ-10044D70-H, for my 1985 F150 Base. I'm getting rid of the radio and I'd like it to look nice(er).
Thanks for any help or leads.
Thanks for any help or leads.
#5
I'm looking for the "Trapezoid" style lower chrome/black vinyl trim molding for the driver's side of my F150. I only need the one that goes in front of the rear wheel well, but it has to be from a long bed. The trapezoid style molding was used up until April 1981. Trucks built after then will have the flat style trim moldings.
#6
Anyone need a feed-back carb., TFI distributor with good module, or computer for 1984 351W? Removed from my F150 during Duraspark II conversion. It all worked when I took it off in December 2011. PM me if you need one or all of these.
__________________
__________________
#7
Lookin for "F350" fender emblem, a working clock that the buttons work, dome light cover (my dome light has map lights), door strikers with intact bushings.
Spare tire hardware...i have everything except however you mount the spare to the carrier. I have the bracketry, but no wheel/tire and hardware to join the two.
Spare tire hardware...i have everything except however you mount the spare to the carrier. I have the bracketry, but no wheel/tire and hardware to join the two.
Trending Topics
#8
Lookin for "F350" fender emblem, a working clock that the buttons work, dome light cover (my dome light has map lights), door strikers with intact bushings.
Spare tire hardware...i have everything except however you mount the spare to the carrier. I have the bracketry, but no wheel/tire and hardware to join the two.
Spare tire hardware...i have everything except however you mount the spare to the carrier. I have the bracketry, but no wheel/tire and hardware to join the two.
What year truck? 80-86 or something newer?
Will be going to my junk yard tomorrow or Thursday.
I can fashion the hardware used to do the mount, just need the bracket that bolts into the side of the bed.
#10
You can get replacement striker hardware from most parts stores in the Help! section. Otherwise, you can take the striker bolt of, then put a small piece of rubber hose over the bolt that just fits, and that works the same way.
#13
Oh, ok, don't need that one. i will see if the emblems are still on the truck I saw last time I was at the junkyard. if they are, will see if I can snag them and let you know.
#14
Still looking or the fuel tank skid plate for the 16 gallon tank! Compatible years are 1980/83 F150 4WD short bed and 1984 F150 4WD short bed before production date 2/1984.
Proving impossible to find, if you see one, let me know!
Proving impossible to find, if you see one, let me know!