hi just starting to tear into my old truck. i know it will be a while before i need this but alot of pickups that i have seen finished have a chrome or stainless drip rail on them. just wondering where i can get info on that? having no luck in the lmc. mine is a 72. thanks for any info

 

Welcome to the site.

Best bet is to find someone parting out a truck and buy it. Doubt anyone is reproducing it.

I scrapped my '67 a few years ago and sold the drip rail pieces, cheap.

 

The 73-79 drip rail moulding is reproduced, but to my knowledge the 67-72 drip rail moulding is not.

 

I know this is an old post. There is a USED OEM pair for $239.00 on Ebay. F*** that. Can you provide a source for the reproduction ones?

PS, MY bad, wrong forum. I need one for a 73-79. The one on Ebay is for a 73-79 as well.

 

Obsolete, not reproduced, 1967/72 F100/350 is the same and there are six pieces.

C7TZ-8151718-A Right & C7TZ-8151719-A Left .. Front Drip Rail Mouldings-above windshield / No Ford Dealer or obsolete parts vendor has any.

C7TZ-8151726-A Right & C7TZ-8151727-A Left .. Side Drip Rail Mouldings-above/behind doors / See below.

2) B5A-7051762-A .. R/L Joint Mouldings-Connect fronts to sides / Same: 1955/56 Ford Passenger Cars / 1961/66 F100/1100 (93 available NOS).

C7TZ-8151726-A = 2 available NOS / C7TZ-8151727-A = 1 available NOS

 

Number Dummy, the original post was from last year and for a 67-72. Can you post the drip rail P/N' and sources for a 73-79?

Thank You

PS I would call you an "old fart" for missing that post date but then you would not provide the information I requested from you...LOL

 

I freely admit to being an old fart and a crabby one at that. DOB 9/9/1944, you do the math.

I didn't miss the post date, you are the one that dredged it up. Since there were no Ford part numbers, I typed the info, found some NOS parts.

 

I pulled my chrome drip rails off and threw them out... When I pulled them off they bent a little. I knew I wasn't going to use them again so I guess I wasn't that easy with them...